The Genie AI logo

Creating a Licence to Assign (UK)

Try our AI Legal Assistant - it's free while in beta 🚀

licence to assign checklist plc

Genie's AI Legal Assistant can draft, risk-review and negotiate 1000s of legal documents

Note: Links to our free templates are at the bottom of this long guide. Also note: This is not legal advice

Introduction

At the core of any commercial transaction lies the need for a licence to assign – an agreement between two parties granting permission for the assignment of rights, property or interest from one to another. Without this important legal document, either party could find themselves held liable should something go wrong. The importance of having a licence to assign in place is clear - both parties must agree to its terms, and all involved must be made aware of their obligations and potential consequences if they fail to abide by them.

Creating such an agreement within the United Kingdom is no small task; all terms and conditions must be specified in writing, including when, where and how the assignment will occur alongside fees and costs associated with it. Additionally, it’s essential to consider any implications on third-party lenders should rights, property or interest be used as collateral. To ensure that all parties are aware of their rights and responsibilities, including the right to terminate an agreement or assign rights/property/interests elsewhere if needed; as well as making sure that this document would stand up in court if necessary.

On top of this comes compliance with applicable laws – both those within Britain but also any others which could apply – meaning that each step needs careful consideration before agreeing anything in writing.

Faced with such complexity when trying to create a legally binding licence for assigning rights, property or interests? Genie AI is here - providing free templates through our market-standard open source legal library which has been taught by millions of data points what constitutes a successful license agreement. With our community template library accessible via our website you can draft up documents yourself quickly and easily without expensive lawyer fees - confident in the knowledge that your paperwork will stand up protect you should disputes arise at any point down the line about these matters.

So why not read on below for our step-by-step guidance on creating licences for assignment? Or access our template library today so you can start drafting your own high quality paperwork immediately!

Definitions

Legislation: Laws created by a government or other governing body. Regulations: Rules or guidelines created by an authority to control or govern an activity or organization. Intellectual Property Office (IPO): Government agency responsible for overseeing intellectual property rights in the United Kingdom. Exclusive License: A license that gives the licensee exclusive rights to use the licensed material. Non-Exclusive License: A license that allows multiple people to use the licensed material. Sole License: A license that gives a single person the exclusive right to use the licensed material. Royalties: A payment made to a licensor in exchange for the use of a particular piece of intellectual property. Certificates of Origin: Documents that certify the origin of a product or service. Government Registry: A government-run system or database used to record and track information.

Understanding the legalities of assigning a license in the United Kingdom

Researching relevant legislation and regulations, consulting with a lawyer to ensure compliance with all laws, understanding the requirements of creating a license to assign, determining the type of license to assign, identifying the rights and obligations of the licensor and licensee, setting the duration, scope, and any other conditions of the license, deciding on the type of license to assign, considering the needs of the licensor and licensee, comparing different license types, selecting the most suitable license type, drafting the license to assign, clarifying all terms and conditions, drafting the language of the license, obtaining approval from all parties involved, finalizing the license to assign, reviewing the license to ensure accuracy and compliance, signing the license documents, obtaining any additional required approvals, registering the license to assign, determining if the license must be registered in a government registry, submitting the license registration paperwork, following up with the registration office to ensure approval, protecting the license to assign, establishing a system to track usage of the license, ensuring that the licensee is adhering to the terms of the license, taking legal action if the license is breached, monitoring the license to assign, reviewing the license periodically, identifying any potential issues with the license, making any necessary changes to the license, re-assigning the license to assign, notifying the current licensee of the intent to reassign, identifying potential new licensees, negotiating the terms of the new license with the new licensee, documenting the license to assign, keeping a copy of the license on file, recording any changes made to the license, retaining records of the license for future reference, get started.

  • Understand the UK’s licensing laws and regulations
  • Know the parameters of the license you are assigning and what rights you are transferring
  • Research the process and formalities of assignment of a license in the UK
  • Familiarize yourself with the terms and conditions of the license you are assigning
  • When you are confident that you understand the legalities of assigning a license in the UK, you can check this off your list and move on to the next step.
  • Research the Copyright, Designs and Patents Act 1988
  • Research the Electronic Communications Act 2000
  • Research any other relevant laws and regulations that may apply
  • Make a note of the relevant provisions of the laws and regulations
  • Analyze the legal requirements for assigning a licence in the UK
  • Make a list of the requirements for assigning a licence
  • When you have a comprehensive understanding of the relevant laws and regulations, you can check this off your list and move on to consulting with a lawyer to ensure compliance with all laws.
  • Contact a lawyer familiar with intellectual property and licensing laws in the UK
  • Discuss the requirements of creating a license to assign and understand the process for ensuring compliance with all relevant laws
  • Ask for a written opinion from the lawyer as to the legality of the proposed license and any other advice that would be helpful
  • Make sure all required changes are made to the license to ensure compliance
  • When all of the above is done, you can move on to the next step, understanding the requirements of creating a license to assign.
  • Familiarize yourself with the legal requirements for creating a license to assign in the UK
  • Research the legal and procedural requirements that apply to assigning a license in the UK
  • Gather the information you need to create a license to assign, such as the names and addresses of the assignee and assignor, the terms and conditions of the license, and any other relevant details
  • Make sure that all the information you have gathered is correct and up-to-date
  • When you are satisfied that you have all the necessary information to create a license to assign, you can move on to the next step.
  • Research the types of licenses available and determine which type is suitable for the purpose of the assignment
  • Consider the length of the license, any restrictions on use, and any other conditions that need to be included
  • Review any local or national laws that may affect the license or the obligations of the licensor and licensee
  • Consult with a lawyer or legal expert to ensure the license is legally binding and enforceable
  • Once the type of license has been determined and it meets all the requirements, it is ready to be finalized and assigned.
  • Identify what rights the licensor will be granting to the licensee
  • Establish what the licensee must do in order to achieve the desired outcome
  • Make sure to include any restrictions on the licensee
  • Consider any financial obligations the licensee may have to the licensor
  • Decide if the licensee will be able to transfer the rights to another
  • Identify any warranties or guarantees offered by the licensor
  • When both parties are in agreement, make sure to record the details in the license
  • When all of the above are accounted for, you can move on to the next step of setting the duration, scope, and any other conditions of the license.
  • Establish the geographic scope of the license and any other conditions that need to be satisfied for the license to be valid
  • Specify the duration of the license, including any provisions for renewal
  • Include additional clauses or conditions that the licensor may want to impose on the licensee
  • Put together a draft of the license agreement, ensuring that it meets all of the requirements and conditions specified
  • Have both the licensor and licensee review and sign the license agreement, with all parties acknowledging the agreement
  • Once all parties have signed the agreement, the license has been successfully assigned and is legally enforceable

• Research the different types of licenses available to assign, such as copyright, trademark, or patent licenses. • Consider the needs of both the licensor and licensee to determine which type of license is most suitable. • Make sure that the chosen license covers all the necessary requirements and limitations. • Check that the license meets legal requirements and is compliant with local regulations. • When you have chosen the type of license that meets the needs of both parties, you can move on to the next step.

  • Consider the needs of the licensor and licensee to ensure that the license meets the requirements of both parties.
  • Evaluate the purpose of the license and the extent to which it will be used.
  • Consider any restrictions that the licensor and licensee may wish to impose on the license in order to protect their rights.
  • Determine any additional terms or conditions that may be necessary to protect either party.

Once you have evaluated the needs of the licensor and licensee, you can move on to comparing different license types.

  • Visit the UK Government’s intellectual property website to learn more about the different types of licenses.
  • Read each license type carefully, paying attention to the different restrictions and benefits each one offers.
  • Consider the needs of the licensor and licensee when making a comparison.
  • Make a list of the pros and cons of each license type to determine the best option.
  • When you are satisfied with your comparison, you will be ready to move on to selecting the most suitable license type.
  • Analyze the type of license you need to assign and decide whether it is an exclusive or non-exclusive license
  • Consider what rights you would like to grant, such as the right to make copies, distribute the work, create derivative works, and/or display the work publicly
  • Research the different license types available to ensure you are selecting the most suitable type for your needs
  • When you have selected the most suitable license type for your needs, you can check this step off your list and move on to drafting the license to assign.
  • Review the license type selected in the previous step and draft the license to assign accordingly
  • Consider the duration of the license and the scope of the rights being assigned
  • Ensure that all parties involved, including the licensee, assignor, and any third parties, are accurately identified
  • Include detailed payment terms, including any upfront payments, ongoing payments, and/or royalties
  • Include provisions for the protection of confidential information
  • Draft any other provisions or terms necessary for the assignment
  • Have the license to assign reviewed by legal counsel
  • Once the license to assign has been approved, have all parties sign it
  • Keep a copy of the signed license to assign for your records
  • You have now completed the drafting of the license to assign and can move on to the next step of clarifying all terms and conditions.
  • Read through the draft of the license to assign and ensure it includes all the essential elements
  • Research any potential implications of the license, such as potential liabilities, tax implications, and other legal requirements
  • Speak with a lawyer or legal professional to ensure that the license is compliant with all relevant laws
  • Check that all of the terms and conditions are clearly outlined and that they are legally binding
  • Make sure that both parties understand the terms and conditions and that they are in agreement
  • Once all parties have agreed to the terms and conditions and the license is legally compliant, you can move onto the next step of drafting the language of the license.
  • Research existing licenses to get an idea of the types of language used
  • Outline all relevant terms and conditions of the license, such as payment terms and delivery terms
  • Draft the language of the license using precise and unambiguous language
  • Include all relevant details, such as the names of the parties involved and the rights to be assigned
  • Ensure the language is legally binding in accordance with UK law
  • Check the language with a solicitor or legal advisor to ensure it is watertight
  • Once the language has been approved, you can check this off your list and move on to obtaining approval from all parties involved.
  • Gather the necessary signatures from both the licensor and licensee
  • Ensure all parties understand their obligations under the license
  • Have all parties sign the license to assign
  • Obtain copies of the signed license from both parties
  • Check that all signatures are valid
  • You have completed this step when all parties have signed the license and all signatures have been verified.
  • Check that all parties have signed the license to assign and obtained the necessary approvals
  • Ensure that the license to assign has been completed in accordance with the relevant laws and regulations
  • Have the license to assign witnessed by a third party, if necessary
  • Obtain a copy of the license to assign and store it securely
  • You will know that this step has been completed when the license to assign has been signed by all parties and witnessed, if required.
  • Go through the license agreement in detail to make sure that all information is accurate and up-to-date
  • Check that all of the necessary parties are included and that their details are correct
  • Ensure that all the terms and conditions comply with UK law
  • Confirm that all the obligations and rights of each party are clearly stated
  • Once you are satisfied that the license is accurate and compliant, you can move on to signing the documents.
  • Have the licensee and assignee sign the license agreement in the presence of two witnesses
  • The witnesses must also sign the license agreement
  • Obtain a signed copy of the license agreement from the licensee and assignee
  • Ensure all signatures are dated
  • Once all the documents have been signed and dated, the license agreement can be registered with the relevant authorities
  • You will know when you can check this off your list when all documents have been signed and dated, and the license agreement has been registered with the relevant authorities.
  • Check the terms of the license to assign. In some cases, it may require additional approvals or signatures from other parties, such as financial institutions or government bodies.
  • Contact the relevant parties and request the necessary approvals or signatures.
  • Once you have obtained all the required signatures and approvals, you can move on to the next step in the process.
  • Collect all relevant documents required to register the license to assign (e.g., deed of assignment, transfer documents, etc.)
  • Submit the documents to the relevant government registry
  • Pay any applicable fees
  • Monitor the process and receive notification of successful registration
  • Once the license is registered, you will receive confirmation from the government registry. This is your indication that you can move on to the next step.
  • Check the applicable regulations to determine if the license must be registered in a government registry
  • Review any relevant laws or regulations to ensure compliance with the law
  • Contact local or state authorities to determine if any specific requirements need to be met before registering the license
  • Determine if the license must be registered in a government registry before assigning it
  • When you have confirmed whether the license must be registered in a government registry, you can move on to the next step of submitting the license registration paperwork.
  • Collect all required documents which may include proof of identity, proof of address, a signed agreement, and/or any other documents required by the registration office
  • Scan or take photographs of the documents and save them in an easily accessible way
  • Submit the license registration paperwork via email, post, or in-person, as required by the registration office
  • Pay any required fees, either online or in-person
  • Check with the registration office to ensure they have received all the paperwork and that the application is being processed
  • Wait for confirmation from the registration office that the license has been approved and registered
  • Once the license has been registered, you can check this off your list and move on to the next step.
  • Contact the registration office to ensure that your license to assign has been approved.
  • Ask for a confirmation that the license to assign has been approved and for any additional documentation or paperwork required.
  • Make sure that any additional documentation or paperwork is completed correctly and that all relevant information has been provided.
  • You will know that you can check this step off your list and move on to the next step when you have received confirmation from the registration office that your license to assign has been approved.
  • Make a copy of the license to assign and store it in a secure place
  • Set up a system to track usage of the license, so you can monitor who is using it and for what purpose
  • Ensure that any person who is using the license is aware of their responsibilities and has accepted them
  • Put a process in place to check that the license is being used correctly and that the assignee has complied with all the conditions
  • Make sure you are able to track any changes to the license and update all relevant parties as necessary
  • When all of the above has been done, you can mark this step as complete and move on to the next step.
  • Create a spreadsheet or database to track usage of the license
  • Record the licensee, the date of the license, and the specific terms of the license
  • Establish a system for tracking and reporting on compliance with the license
  • Set up an automated system for alerting the licensor of any violations or changes in use
  • Monitor compliance with the license on an ongoing basis
  • When satisfied that the system is in place and functioning properly, you can move on to the next step.
  • Monitor the licensee’s use of the license, including any activities, products or services that are made available using the license.
  • Make sure that the licensee is adhering to the terms of the license, including any restrictions and conditions. -Ensure that the licensee is not making any unauthorised modifications to the license or using it for any unlawful purpose. -Check that the licensee is not using the license to create any derivative works or to infringe any third party rights. -Review the license periodically to ensure that the licensee is still in compliance with the terms of the license.
  • How you’ll know when you can check this off your list and move on to the next step: Once you have monitored the licensee’s use of the license, made sure that the licensee is adhering to the terms of the license, checked for any unauthorised modifications, reviewed the license periodically, and verified that the licensee is not using the license to create any derivative works or to infringe any third party rights, then you can move on to the next step.
  • Research the breach and what it means for you and the licensee
  • Make sure the breach has occurred and if it is a serious violation
  • Consider the options available to you to rectify the breach and take appropriate action, such as issuing a warning or terminating the license
  • Be aware of the legal implications and make sure you are acting within UK laws
  • Consider taking legal action if the breach cannot be resolved amicably or the licensee is unwilling to rectify the breach
  • Keep records of all communication and documentation related to the breach and the options that were taken
  • When you have taken the necessary legal action, you can check this step off your list and move on to monitoring the license to assign.
  • Review the license regularly to ensure it is being followed and the assignor is upholding their obligations
  • If any breaches are found, take legal action as outlined in the previous step
  • Monitor for any changes in the assignor’s circumstances such as changes of address or contact details
  • Keep up-to-date records of all correspondence and communications between parties involved
  • When you are satisfied that the license is being followed, you can move on to the next step of reviewing the license periodically.
  • Assess the performance of the license agreement and make any necessary changes
  • Monitor the progress of the license agreement to ensure that terms and conditions are being met
  • Review any reports or information received from the licensee
  • Review the licensee’s compliance with their obligations
  • Review the financial performance of the licensee
  • Make sure that the licensee is using the licensed technology in accordance with the agreement
  • Identify any areas of non-compliance with the license agreement
  • Determine whether the license agreement should be renewed, amended or terminated
  • Check to make sure that the licensee has met all of the obligations set out in the agreement
  • When all of the above points have been reviewed and checked off, the license agreement can be marked as reviewed and the process can be repeated regularly.
  • Examine the license to ensure that it is valid and up-to-date
  • Look out for any potential changes in legislation that may affect the license
  • Check that all parties involved are aware of the terms and conditions of the license
  • Look for any inconsistencies in the language or wording of the license
  • Make sure that the license does not conflict with any existing contracts or agreements
  • Once you have identified any potential issues, address them accordingly
  • Confirm that all changes have been made and signed off by relevant parties
  • When the license has been reviewed and approved, you can move on to the next step.
  • Read through the license and make any changes necessary to reflect the new assignee
  • Make sure to update the license to reflect the new assignee’s name, address, and any other relevant information
  • Make sure that all changes are in compliance with the applicable laws and regulations
  • Once all changes have been made, review and double-check the license to make sure it accurately reflects the new assignee
  • When you have reviewed the license and are satisfied that all changes have been made, you can move on to the next step of re-assigning the license to the assignee.
  • Create a copy of the original license to assign and fill in the details of the new licensee.
  • Submit the completed form to the original licensor.
  • Pay any necessary fees associated with the transfer.
  • Once the licensor has approved the transfer and issued a new license, you can check this off your list and move on to the next step.
  • Draft a letter to the current licensee, and include the details of the reassignment, such as the date, the name of the potential new licensee, and the new address
  • Send the letter of intent to the current licensee by registered post
  • Wait to receive a signed acceptance from the current licensee confirming that they understand the reassignment. This should be received within 14 days of the date of the letter.
  • Once you have received the signed acceptance, you can move on to the next step of identifying potential new licensees.
  • Research the market for new licensees who may be interested in the licence
  • Contact potential new licensees and explain the reasons for assigning the licence
  • Obtain information from the potential new licensees regarding their ability to comply with the terms of the licence
  • Compare the terms offered by the different potential new licensees and select the new licensee
  • When a new licensee has been selected, you can move on to the next step of negotiating the terms of the new license with the new licensee.
  • Contact potential new licensees and request more information on their needs and requirements
  • Establish a timeline for the license agreement’s negotiations
  • Present the proposed license terms to the new licensee
  • Negotiate and agree on the terms of the new license with the new licensee
  • Once the new licensee agrees to the license terms, send them a copy of the written agreement to review
  • Allow the new licensee to suggest any changes to the written agreement
  • Make any necessary changes to the agreement and get the new licensee’s approval
  • Finalise the agreement and sign the license to assign
  • You can check off this step and move on to the next step once the license to assign has been agreed on by both parties and signed.

• Have the new licensee sign the license to assign document to make it legally binding. • When the new licensee has signed the license to assign, have both the assignor and the new licensee sign the document. • Have the new licensee provide two copies of a signed license to assign document. • Send one copy to the assignor and keep the other copy on file. • Once all of the documents have been signed, the license to assign has been documented and the step is complete.

  • Obtain a hard copy of the licence to assign.
  • Make a copy of the licence to assign.
  • Store the copy in a secure location.
  • Ensure the copy is clearly labelled and organised.
  • Once the copy is securely stored, you can check this step off your list and move on to the next step.
  • Make a note of any changes, including the date they were made and why
  • Document any new terms and conditions that have been added
  • Record any changes made to the duration or scope of the license
  • Keep a copy of the amended license on file
  • When the changes have been recorded, you can check this step off your list and move on to the next step.
  • Gather all supporting documents that were used in the preparation of the license and keep them together in a secure location
  • Make copies of the document, if required, and store in the same secure location
  • Update the license register to record the details of the license
  • Make sure that all parties involved in the license are aware of their obligations under the agreement
  • Retain copies of all correspondence received and sent in relation to the license
  • How to know when you can check this off your list and move on to the next step: once all of the documents are stored in a secure location and the license register is updated, the step is complete.

Q: What is a Licence to Assign?

Asked by Emma on March 2, 2022. A: A Licence to Assign is an agreement between two parties that allows one party to transfer their rights and obligations under a contract to another party. This enables the transfer of an asset or property from one party to another. It is more commonly used in commercial leases, where the tenant has the right to transfer the lease to another party. In this agreement, both parties agree to the terms of assignment and acknowledge that the assignee will take on all of the obligations and rights of the assignor.

Q: What is the difference between a Licence to Assign and an Assignment?

Asked by Jack on April 14, 2022. A: An Assignment is a legal document that transfers ownership of a particular asset, contract or property from one party (the assignor) to another party (the assignee). The assignment document itself acts as proof of ownership, and it must be signed by both parties in order for it to be valid. A Licence to Assign, on the other hand, is an agreement between the two parties that allows for the transfer of rights and obligations under a contract from one party to another. The licence does not transfer ownership directly, but instead allows for the assignment of rights and obligations under an existing contract.

Q: How does a Licence to Assign work?

Asked by Sarah on July 10, 2022. A: A Licence to Assign works in much the same way as any other contract between two parties – both parties must agree to its terms before it can be legally binding. In this case, both parties agree that one party (the assignor) may transfer their rights and obligations under an existing contract or agreement to another party (the assignee). The licence must include details such as the names of both parties involved, a description of the asset being transferred, as well as any restrictions on assignment (such as time limits). Once both parties have agreed to the terms of the licence and signed off on it, then it is legally binding.

Q: What are some common restrictions on assigning licences?

Asked by David on August 5, 2022. A: Common restrictions that may be included in a Licence to Assign include time limits on when the assignment may take place, restrictions on who may act as an assignee or assignor (e.g. certain individuals or companies), and any requirements for prior approval from third parties (such as landlords). Depending on your specific situation and industry sector, these restrictions should be tailored to your particular needs when drafting your licence.

Q: Are there any special considerations for assigning licences in different jurisdictions?

Asked by Emma on August 25, 2022. A: Yes – different laws and regulations apply in different jurisdictions when it comes to assigning licences. In the UK specifically, all assignments must be in writing and signed by both parties in order for them to be legally binding. Additionally, any restrictions imposed by third parties (such as landlords) must also be taken into account when drafting your licence. It’s important to check with local authorities if you’re unsure about any specific regulations that may apply in your jurisdiction before drafting your licence.

Q: What type of information should be included in a Licence to Assign?

Asked by Jack on October 1, 2022. A: A Licence to Assign should include key details such as the names of each party involved in the transaction, as well as a description of what is being assigned (such as a property or asset). Additionally, any restrictions imposed by third parties (such as landlords) should also be included in the licence. Finally, if applicable, any requirements for prior approval from third parties should also be included in order for the assignment to be legally valid.

Q: Is it possible for a Licence to Assign to include additional clauses?

Asked by Sarah on October 15, 2022. A: Yes – it is possible for additional clauses or conditions to be added into a Licence to Assign if required by either party involved in the transaction or if imposed by third parties (such as landlords). These clauses could cover anything from time limits on when the assignment can take place or requirements for prior approval before proceeding with the transaction. It’s important that all clauses are clearly listed within the licence itself so that both parties understand their respective obligations under the agreement before signing off on it.

Q: Does a Licence to Assign need to be registered with any government bodies?

Asked by David on November 5, 2022. A: No – there is no requirement for a Licence to Assign to be registered with any government bodies or authorities in order for it to be legally valid. However, depending upon your particular circumstances (e.g., if you are assigning property or assets), there may be other registration requirements that need fulfilling before proceeding with an assignment transaction (such as registering with HMRC). It’s important that you check with local authorities before proceeding with any transaction so that you are aware of any registration requirements that you may need fulfill beforehand.

Q: Is there a standard form template available for creating a Licence to Assign?

Asked by Emma on December 10, 2022. A: Yes – there are several standard form templates available online which can help you create your own customised Licence To Assign Agreement quickly and easily without needing specialist legal advice or assistance from solicitors/lawyers specialising in commercial law/leasing law etc… These templates can provide guidance around what needs including within your agreement and how this information should appear so that it is legally valid according to UK law/regulations etc…

Q: Is it possible for two companies located in different countries/jurisdictions/laws systems/regulations etc., such as UK vs USA vs EU etc.,to use one Licence To Assign Agreement?

Asked by Jack on January 2nd 2023 A: Yes – it is possible for two companies located in different countries/jurisdictions/laws systems/regulations etc., such as UK vs USA vs EU etc.,to use one Licence To Assign Agreement if certain conditions are met first e.g., both countries’ laws do not conflict with each other; each company’s individual business model/sector/industry/needs are taken into account; any specific requirements/restrictions imposed by either country’s legal system are addressed accordingly; etc… If these conditions cannot be met then separate agreements may need creating customised towards each country’s laws/regulations etc… It’s important when entering into such agreements across countries that specialist legal advice is sought first so that everything is done correctly according to each country’s laws/regulations etc…

Q: What legal requirements do I need meet when creating my own Licence To Assign Agreement?

Asked by Sarah on February 1st 2023 A: When creating your own Licence To Assign Agreement there are some legal requirements which need meeting in order for it be legally valid according UK law e .g., all details regarding what is being assigned must appear clearly within agreement; all signatures from relevant individuals must appear at end; all relevant third-party restrictions need adhering too; any additional clauses needed must also appear; etc… It’s important when creating such agreements that specialist legal advice is sought first so that everything done correctly according UK law/regulations etc…

Q Do I need solicitors/lawyers specialising in commercial law/leasing law etc., when creating my own Licence To Assign Agreement?

Asked by David March 8th 2023 A: Whilst solicitors/lawyers specialising in commercial law/leasing law etc., can help provide guidance around what needs including within your agreement and how this information should appear so that it is legally valid according UK law/regulations etc., this isn’t always necessary - there are several standard form templates available online which can help you create your own customised Licence To Assign Agreement quickly and easily without needing specialist legal advice or assistance from solicitors/lawyers specialising in commercial law/leasing law etc… However if you’re unsure about certain aspects within your agreement then seeking specialist legal advice first could save time further down line plus ensure everything done correctly according UK law/regulations etc…

Example dispute

Suing a company for breach of a licence to assign.

  • Identifying the relevant contractual obligations contained in the licence to assign
  • Establishing that the defendant has breached the licence to assign by failing to adhere to the terms and conditions of the agreement
  • Establishing that the breach has caused the plaintiff financial losses or other damages
  • Identifying the amount of damages which should be paid out by the defendant
  • Seeking a court order to compel the defendant to comply with the terms of the licence to assign
  • Seeking a court order to award damages to the plaintiff
  • Negotiating a settlement out of court to compensate the plaintiff for their losses and to ensure compliance with the terms of the licence to assign.

Templates available (free to use)

Licence To Assign A Commercial Underlease With Guarantee Licence To Assign New Commercial Property Lease 0 Licence To Assign Old Commercial Property Lease Licence To Assign Old Commercial Property Lease C

Helpful? Not as helpful as you were hoping? Message me on Linkedin

Links to get you started

‍ Our AI Legal Assistant (free while in beta) Contract Template Library Legal Clause Library

Try the world's most advanced AI Legal Assistant, today

The Genie AI logo, a dual-shaded purple fountain-pen nib, with the words Genie AI written in Black underneath.

  • Lexis ® Library gnb_contactus_newwindow

LexisNexis Webinars

Offering minimal impact on your working day, covering the hottest topics and bringing the industry's experts to you whenever and wherever you choose, LexisNexis ® Webinars offer the ideal solution for your training needs.

Learning Center Splash

  • Lexis ® Smart Forms gnb_contactus_newwindow

Lexis ® Smart Precedents

Lexis ® Smart Precedents is a quick way to draft accurate precedents so you can be confident your documents are correct, giving you more time to focus on clients.

Learning Center Splash

  • Blogs gnb_contactus_newwindow
  • LexTalk ® UK gnb_contactus_newwindow

--> Topics