• Insert the battery and the activated Jio SIM in your JioFi device and switch it on
  • Turn on Wi-Fi on the device you wish to use (laptops, tablets, mobile phones, gaming devices, cameras, smart TVs, etc.)
  • Search for available Wi-Fi networks
  • Connect to the network name of your JioFi
  • Enter the password as mentioned in the device. (To find the password, please open the battery cover. Your default password is mentioned on the inside panel of the battery cover)
  • You are now ready to connect to Jio's high-speed internet

Still need to discuss something?

Connect with us, download myjio.

  • Jio Manuals
  • Wireless Router

Jio JioFi Manual

  • Manual (45 pages)
  • page of 17 Go / 17

Table of Contents

Advertisement

  • 1 About Your Device
  • 2 Charging the Device
  • 3 Charging Time
  • 4 Resetting the Device
  • 5 Manage Your Device
  • 6 Using Your Device
  • 7 Battery Usage Precautions
  • 8 Technical Specifications
  • Download this manual

Related Manuals for Jio JioFi

Wireless Router Jio JioFi JMR1140 Quick Start Manual

Summary of Contents for Jio JioFi

  • Page 1 JioFi 5 steps to be connected everywhere.
  • Page 2 Know your JioFi Signal Wi-Fi WPS button connector Indicator Indicator Power Connection Battery Button Indicator Indicator...
  • Page 3 Open the back cover and locate SIM/SD card slot. Slide the SIM/SD tray downwards (OPEN) to lift the tray up. Further insert the SIM/SD card and slide the tray upwards (LOCK) to secure the tray. Make sure they are placed properly with the chip facing down.
  • Page 4 (Service Set Identifier)and Password mentioned in the battery compartment before inserting the battery and replacing back cover. Commodity Name:Router M2S (Black) RSN: RPEMFXXXXXXXXXX MAC ID: XXXXXXXXXXXX IMEI: XXXXXXXXXXXXXXX EAN: 6932694820593 SSID: JioFi2_XXXXXX PWD: XXXXXXXXXX System Log IN IP:http://jiofi.local.html USERNAME/PWD: 1.26 W/kg administrator/administrator...
  • Page 5 The Setup is done. Now Turn ON your device and connect upto 31 WiFi enabled devices on your wireless network by using the SSID and password...
  • Page 6 To connect quickly, press WPS Button for 3 seconds and then press the WPS button on your wireless device to connect.
  • Page 7 Welcome to your digital life. Download Jio4GVoice on your smart phone to enable HD Voice Calling and Video Calling using your JioFi. *JioFi will work with Jio Sim card only.

Page 8: About Your Device

Page 9: resetting the device.

  • Page 10 Indicators Indicator Status State Blinking fast No SIM card Weak signal or No service Blinking slow Signal available indicator Medium signal Good signal LTE network connected and have Blink data traffic Connection LTE network connected but no indicator data traffic LTE network disconnected Wi-Fi on,1 or more Wi-Fi client Wi-Fi...
  • Page 11 In case the device goes into sleep mode press the power button lightly to bring it back to active mode. During sleep mode, the SSID of your JioFi will stop broadcasting and a breathing light can be seen on the power button.

Page 12: Manage Your Device

  • Page 13 For fast support A user connected access the Internet Please check if the user is connected to JioFi SSID. Make sure your SIM card is properly inserted. Check if your JioFi is connected to the network. Ensure your sim card is activated and has adequate data balance available.
  • Page 14 Safety To the Owner Always keep the device at a distance of 20cm from medical devices like hearing aids, pacemakers as it may interfere when the device is turned on. It is advisable to consult your physician or the manufacturer of the medical device before using your device.

Page 15: Using Your Device

Page 16: technical specifications.

  • Page 17 With love, from Jio Reach us If you have further question or require personal assistance, please contact JioCare by calling or sending on email. Phone: 198 from your Jio number or 1800-88-99999 from any network (24 Hrs.) Email: [email protected] Visit www.jio.com We wish you a beautiful experience with Jio.

Rename the bookmark

Delete bookmark, delete from my manuals, upload manual.

How-To Geek

How to assign a static ip address in windows 10 or windows 11.

When organizing your home network it's easier to assign each computer it's own IP address than using DHCP. Here we will take a look at doing it in XP,

Quick Links

What is a static ip address, assign static ip addresses via your router, how to set a static ip address in windows 11, how to set a static ip address in windows 10, how to set a static ip address in windows 7 or 8 using "network connections", set a static ip address in windows vista, set a static ip address in windows xp, key takeaways.

  • To set a static IP address in Windows 10 or 11, open Settings -> Network & Internet and click Properties for your active network.
  • Choose the "Edit" button next to IP assignment and change the type to Manual.
  • Flip the IPv4 switch to "On", fill out your static IP details, and click Save.

Sometimes, it's better to assign a PC its own IP address rather than letting your router assign one automatically. Join us as we take a look at assigning a static IP address in Windows.

A static IP address is manually set to a permanent, fixed address rather than being assigned automatically by your router using a procotol known as Dynamic Host Configuration Protocol (DHCP). DHCP is a handy way for devices to connect to your network more easily, because you don't have to configure IP addressing for each new device yourself. The downside to automatic addressing is that it's possible for a device's IP address to change from time to time, which is why people choose static IPs for certain types of devices. For example:

  • You have a device like a home media server that you want to be able to find using the same IP address or host name each time.
  • You have certain apps that can only connect to network devices using their IP address. In particular, many older networking apps suffer this limitation.
  • You forward ports through your router to devices on your network. Some routers play nice with port forwarding and dynamic IP addresses; others do not.

Whatever your reason, assigning static IP addresses to devices is not difficult, but you do have a choice to make---whether to do it from the router or on the device itself.

Related: How to Set a Static IP Address in Ubuntu

While this article covers assigning static IP addresses to PCs within Windows itself, there is another way to go about it. Many routers allow you to assign a pool of IP addresses that are handed out to specific devices (based on the device's physical, or MAC address). This method offers a couple of significant advantages:

  • IP addresses are still managed by the router, meaning that you won't have to make (and keep up with) changes on each individual device.
  • It's easier to assign addresses within the same IP address pool your router uses.

This article is about assigning static IP addresses directly to PCs running Windows. We've already got a great guide on How to Set Static IP Addresses On Your Router , so if that's the way you want to go, be sure to give it a read.

With all that in mind, though, let's take a look at how to assign static IP addresses within any version of Windows.

Related: How to Find Your Router's IP Address on Any Computer, Smartphone, or Tablet

To set a static IP address in Windows 11, you'll want to open Settings, go to Network & Internet, and then find the Properties for your network. Inside there you'll be able to click the Edit button for IP Assignment and then fill out the manual network details.

First, open up the Settings app and then find Network & Internet on the left-hand side. You'll be presented with a panel that shows your current network connection. You can click where it says "Properties" right underneath the network, or if you have multiple network connections you can drill down into the specific network to see the IP address details for each one . In this case it's called "Ethernet", but you will most likely see "Wi-Fi" as the option to choose.

Network & Internet Settings Windows 11

Once you've drilled down into the network connection that you want to set a manual IP for, scroll down until you see "IP Assignment" and then click the Edit button to the right.

Windows 11 Ethernet settings

Once there, you'll flip the drop-down to "Manual" and switch the IPv4 switch to "On". At this point you can fill out your network details and click Save to finish.

Windows 11 manual ip settings

You can also use the old-school Network Connections panel in Windows 11, so if you prefer to use that method, keep reading.

If you're interested in more advanced networking, you might need to set up a static TCP/IP route , reset the entire TCP/IP stack on Windows , check open TCP/IP ports , find your MAC address on Windows , or find your IP address from the Command Prompt . We've got you covered there too.

To set a static IP address in Windows 10, you'll need to open the Settings app and drill down to Network & Internet. From there you'll select Properties for your network, and then the Edit button next to IP Assignment where you can input a manual IP address.

First, open the Settings app and locate the Network & Internet button.

Windows 10 settings app

On the next screen you'll see your network status, which should show you your active network. Here you'll want to click the Properties button. If you have multiple different networks, you could select them from the left-hand menu---in our case you'll notice we have both Wi-Fi and Ethernet networks, so you'll want to pick the one that you are trying to set a manual IP address for. You'll notice this is the same method we use when we're trying to find an IP address on Windows 10 .

Windows 10 network & internet settings

On the network properties screen, scroll down until you see "IP settings" and click the Edit button under "IP assignment".

windows 10 network settings

In the resulting popup window, change the Edit IP settings dropdown to Manual and then flip the IPv4 switch to "On". Fill out the details, click Save, and you should be good to go.

Windows 10 manual ip settings

You might need to reboot to get all of your applications to work properly, just because it's Windows.

It's worth noting that you can use the old Network Connections method to set an IP address in any version of Windows, so if you prefer that method, keep reading.

To change the computer's IP address in Windows 7, you'll need to open the "Network Connections" window. Hit Windows+R, type "ncpa.cpl" into the Run box, and then hit Enter.

how to setup static ip for jiofi

In the "Network Connections" window, right-click the adapter for which you want to set a static IP address, and then select the "Properties" command.

how to setup static ip for jiofi

In the properties window for the adapter, select "Internet Protocol Version 4 (TCP/IPv4)" and then click the "Properties" button.

how to setup static ip for jiofi

Select the "Use the following IP address" option, and then type in the IP address, subnet mask, and default gateway that corresponds with your network setup. Next, type in your preferred and alternate DNS server addresses. Finally, select the "Validate settings upon exit" option so that Windows immediately checks your new IP address and corresponding information to ensure that it works. When you're ready, click the "OK" button.

how to setup static ip for jiofi

And then close out of the network adapter's properties window.

how to setup static ip for jiofi

Windows automatically runs network diagnostics to verify that the connection is good. If there are problems, Windows will give you the option of running the Network troubleshooting wizard. However, if you do run into trouble, the wizard likely won't do you too much good. It's better to check that your settings are valid and try again.

Changing your IP from DHCP to a Static address in Vista is similar to other versions of Windows, but getting to the correct location is a bit different. Open the Start Menu, right-click on Network, and select Properties.

how to setup static ip for jiofi

The Network and Sharing Center opens...click on Manage network connections.

how to setup static ip for jiofi

Right-click on the network adapter you want to assign an IP address and click Properties.

how to setup static ip for jiofi

Highlight Internet Protocol Version 4 (TCP/IPv4) then click the Properties button.

sshot-2010-06-06-[02-49-46]

Now change the IP, Subnet mask, Default Gateway, and DNS Server Addresses. When you're finished click OK.

sshot-2010-06-06-[02-51-04]

You'll need to close out of Local Area Connection Properties for the settings to go into effect.

sshot-2010-06-06-[02-51-16]

Open the Command Prompt and use the

command to verify that the changes were successful.

sshot-2010-06-06-[02-52-29]

To set a Static IP in Windows XP, right-click the "My Network Places" icon, and then select "Properties."

how to setup static ip for jiofi

Right-click the adapter for which you want to set the IP, and then select "Properties" from the context menu.

how to setup static ip for jiofi

Select the "Internet Protocol (TCP/IP)" entry, and then click the "Properties" button.

sshot-2010-06-05-[22-27-58]

Select the "Use the following IP address" option. Type in the IP address, subnet mask, default gateway, and DNS server addresses you want to use. When you're finished, click the "OK" button.

sshot-2010-06-05-[22-28-15]

You will need to close out of the adapter's properties window before the changes go into effect.

sshot-2010-06-05-[22-29-15]

And you can verify your new settings by using the

 command at the command prompt.

sshot-2010-06-05-[22-37-10]

By and large, it's better to let most of your devices have their IP addresses assigned automatically by your router. Occasionally, though, you might want to set a static IP address for a particular device. While you can set static IP addresses directly on your devices (and this article has shown you how to do just that on Windows PCs), we still recommending setting up static IP addressing on your router if possible. It will just make life easier.

Related: How to Find Any Device's IP Address, MAC Address, and Other Network Connection Details

How to configure a static IP on Windows 10 or 11

Do you need to switch from a dynamic to a static IP address configuration on Windows 11 or 10? Here's how.

Windows 11 static IP

  • Windows 11 static IP
  • Windows 10 static IP

On Windows, the router's Dynamic Host Configuration Protocol (DHCP) server is (usually) responsible for assigning a dynamic Transmission Control Protocol/Internet Protocol (TCP/IP) configuration to every device in the network, including to your computer running Windows 11 or Windows 10.

Although a dynamic IP address is the recommended configuration for most situations, you may need to change to a static IP address if you're thinking about setting up a printer or file sharing, or you have to configure port forwarding on the router to your computer.

The reason is that a dynamic network configuration can change at any time after the lease from the DHCP expires and if the address changes, network resources you may have configured will stop working. Setting a static IP address will always stay the same on the computer, allowing a more reliable experience sharing resources in the network or forwarding ports.

Whatever the reason, on Windows 10 and 11, you have many ways to configure a static TCP/IP address, including using the Settings app and Command Prompt.

This guide will walk you through the different ways to configure a static network configuration on Windows 11 and 10.

How to set a static TCP/IP network configuration on Windows 11

On Windows 11, you can change your computer's dynamic IP configuration to static in at least two ways through the Settings app or commands.

Configure IP from Settings app

To assign a permanent TCP/IP configuration on Windows 11, use these steps:

  • Open  Settings .
  • Click on  Network & internet .
  • (Optional) Click on Advanced network settings .
  • Under the "More settings" section, click on Hardware and connection properties.
  • Note the current IPv4 ,  Subnet mask ,  Default Gateway , and  DNS server addresses to determine the new configuration, as it has to be in the same network scope.
  • Click the  Ethernet  or  Wi-Fi  page on the right side from the "Network & internet." page.
  • Quick note:  If you select the Wi-Fi page, you need to click on the connection properties to access the network settings.
  • Click on the  Edit  button for the "IP assignment" setting.
  • Select the  Manual  option from the drop-down menu.
  • Turn on the  IPv4  toggle switch.
  • Confirm the IP address for the computer – for example, 10.1.4.90.
  • Confirm the subnet mask for the configuration – for example, 255.255.255.0.
  • Confirm the default gateway address (usually your router's IP) – for example, 10.1.4.1.
  • Confirm the preferred DNS address – for example, 10.1.4.1.
  •   Quick note:  In a home network, you may also be able to use the router's IP address for the DNS configuration. You can also use third-party DNS services like Google Public DNS, Cloudflare, Cisco's OpenDNS, and others. 
  • (Optional) Select the  "On (automatic template)"  option for the "DNS over HTTPS" setting and leave the  "Fallback to plaintext"  option disabled unless you want to encrypted as well as unencrypted traffic or you're troubleshooting connectivity.
  • Quick note:  DNS over HTTPS (DoH) is a feature that encrypts the DNS queries over the HTTPS protocol to improve security and privacy on the internet. You only want to enable this feature if the DNS server supports this feature.
  • Confirm the alternate DNS address (if applicable).
  • (Optional) Select the  "On (automatic template)"  option for the "DNS over HTTPS" setting and leave the  "Fallback to plaintext"  option disabled.
  • Click the  Save  button.

Once you complete the steps, the computer will start using the static network configuration. If everything has been configured correctly, you should be able to open the web browser to access the internet.

If you entered an address (such as the DNS address) and then changed it, you probably won't be able to save the settings. If this is the case, cancel the configuration, start over, enter the correct configuration, and then try to save the settings.

Configure IP from Command Prompt

To set a static TCP/IP configuration on Windows 11, use these steps:

  • Open  Start .
  • Search for  Command Prompt , right-click the top result, and select the  Run as administrator  option.
  • Type the following command to see your current networking configuration and press  Enter : ipconfig /all
  • Confirm the name of the adapter and the networking configuration, including the IPv4 , Subnet mask , Default Gateway , and DNS Servers .
  • Type the following command to configure a static TCP/IP address and press  Enter :  netsh interface ip set address name= "ADAPTER-NAME" static IP-ADDRESS SUBNET-ADDRESS DEFAULT-GATEWAY-ADDRESS

In the above command, replace  ADAPTER-NAME  with the name of your network adapter. Change  IP-ADDRESS SUBNET-ADDRESS    DEFAULT-GATEWAY-ADDRESS  with the device IP address, subnet mask, and default gateway addresses you want. For example, this command sets the 10.1.4.90, 255.255.255.0, 10.1.4.1 configuration:  netsh interface ip set address name="Ethernet 10Gb" static 10.1.4.90 255.255.255.0 10.1.4.1

  • Type the following command to set a DNS server address and press  Enter :  netsh interface ip set dns name="ADAPTER-NAME" static DNS-ADDRESS  

In the command, change  ADAPTER-NAME  with your adapter's name and  DNS-ADDRESS  with the DNS server address of the network. For example, this command sets the local router as the DNS server:  netsh interface ip set dns name="Ethernet 10Gb" static 10.1.4.1

  • Type the following command to set an alternate DNS server address and press  Enter :  netsh interface ip add dns name="ADAPTER-NAME" DNS-ADDRESS index=2

In the command, change  ADAPTER-NAME  with the adapter's name and  DNS-ADDRESS  with an alternate DNS server address. For example, netsh interface ip add dns name="Ethernet 10Gb" 1.1.1.1 index=2

After you complete the steps, the commands will set a static network configuration on Windows 11.

How to set a static TCP/IP network configuration on Windows 10

On Windows 10, you can also use the Settings app and Command Prompt to set up a static IP network configuration.

To assign a permanent TCP/IP configuration on Windows 10, use these steps:

  • Click on  Ethernet  or  Wi-Fi .
  • Click on the active connection on the right side.
  • Click the  Edit  button for the "IP assignment" setting.
  • Select the  Manual  option.
  • Confirm the subnet prefix length (subnet mask) for the configuration – for example, 24 to specify the 255.255.255.0 subnet mask.
  • Quick tip:  It's important to use the number that represents the network instead of the subnet mask. Otherwise, the configuration won't save. If you don't know the subnet prefix length for your subnet mask, you can use any  online subnet calculator  to find out.

Once you complete the steps, Windows 10 will start using the static IP configuration. If you lose network connectivity, restart the computer to regain access to the local network and internet.

To change from dynamic to static IP address with commands on Windows 10, use these steps:

In the command, change  ADAPTER-NAME  with your adapter's name and  DNS-ADDRESS  with the DNS server address of the network. For example, this command sets the local router as the DNS server:  netsh interface ip set dns name=" Ethernet 10Gb" static 10.1.4.1

In the command, change  ADAPTER-NAME  with the adapter's name and  DNS-ADDRESS  with an alternate DNS server address. For example, netsh interface ip add dns name="Ethernet0" 1.1.1.1 index=2

After you complete the steps, the network configuration will switch from dynamic to static on Windows 10.

Get the Windows Central Newsletter

All the latest news, reviews, and guides for Windows and Xbox diehards.

Mauro Huculak

Mauro Huculak is technical writer for WindowsCentral.com. His primary focus is to write comprehensive how-tos to help users get the most out of Windows 10 and its many related technologies. He has an IT background with professional certifications from Microsoft, Cisco, and CompTIA, and he's a recognized member of the Microsoft MVP community.

  • 2 Microsoft News Roundup: Call of Duty on Game Pass, XPS 14 & 16, and more reviews than you can shake a stick at
  • 3 Best Helldivers 2 stratagems: Tier list, for early game, solo, bugs, and Automatons
  • 4 Elden Ring: Shadow of the Erdtree is this year's most anticipated DLC, and you can pre-order at a discount — here's how
  • 5 Starship Troopers star "can't wait to play" Helldivers 2, suggests a collab I'd kill to see: "Maybe we should do a crossover movie?!"

how to setup static ip for jiofi

Simple Answers

Does Jiofi provide static IP?

Table of Contents

  • 1 Does Jiofi provide static IP?
  • 2 Does IP address change in Jiofi?
  • 3 Is Jio static or dynamic?
  • 4 What is the IP address of Jio?
  • 5 How do I get a static IP?
  • 6 How do I give my Jio a static IP address?

Technically this is possible. Although its not the sim card itself which gives you a static ip, its the identity which is stored on your simcard which is used to log on to a SGSN who provides the internet gateway to your mobile device.

Does IP address change in Jiofi?

Although you can change the IP address of the modem, this is rarely necessary. However, if you establish a VPN connection to a server that assigns IP addresses in the same range as the one that is used by the modem, you must change the IP address of the modem to prevent network problems.

Does Jio use dynamic IP address?

Jio wifi or jio Mobile sim card used public IP address or dynamic IP which change automatically after some time and it create problem with login, website hosting because when public IP will change then our website login session expired and you are logout.

Can we get static IP with dongle?

4G modems have always a internal network with internal IP address towards you router or computer. Even you have static public IP address from the mobile operator/carrier, incoming request can not route to you internal IP i.e. router and computer, since there are no way to forward it.

Is Jio static or dynamic?

Presently, they provide static IP only for Surveillance Solution.

What is the IP address of Jio?

Type 192.168. 1.1 (the most common IP for Jio routers) in the address bar of your web browser to access the router’s web-based user interface. The default username for your Jio router is admin.

How do I find my Jio static IP?

If you are talking about “having your jiofi router assigned a STATIC PUBLIC IP by JIO every rime it powers up”, you need to contact JIO and ask them STATIC PUBLIC ASSIGNMENT.

Does LTE have IP address?

LTE networks are all-IP networks. A default bearer is established for each APN (Access Point Name)1 a user has, and thus a unique IP address is assigned for each APN.

How do I get a static IP?

How do I set a static IP address in Windows?

  • Click Start Menu > Control Panel > Network and Sharing Center or Network and Internet > Network and Sharing Center.
  • Click Change adapter settings.
  • Right-click on Wi-Fi or Local Area Connection.
  • Click Properties.
  • Select Internet Protocol Version 4 (TCP/IPv4).

How do I give my Jio a static IP address?

Does Airtel give static IP?

Yes, Airtel broadband gives you static IP on 99 Rs/month rental , but all ports not open on static ip , you can use its only for camera purpose, because you ccan customize ports on DVR , common ports like 25 , 80 , 443 are blocked & there is no benefit to go to airtel support.

Privacy Overview

How to set static IP address on Windows 10

You can assign a static IP address manually on Windows 10 in many ways, and in this guide, you'll learn how.

Avatar for Mauro Huculak

  • To set a static IP address on Windows 10, open Settings > Network & Internet > Wi-Fi , click the connection, click on “Edit,” select “Manual,” turn on “IPv4,” and set the static IP address.
  • Alternatively, you can configure a static IP address from Command Prompt, PowerShell, and Control Panel.

UPDATED 12/20/2023: On Windows 10, setting a static IP address to a computer is a configuration you may need to set up in many scenarios. For instance, if you plan to share files , set up a printer on a local network , enable and use Remote Desktop , or configure port forwarding on the router.

If you don’t assign a static IP address, services or a port forwarding configuration may eventually stop working. The reason is that, by default, connected devices use dynamic IP addresses assigned by the Dynamic Host Configuration Protocol (DHCP) server (usually the router), which can change anytime, as soon as you restart the machine or after the dynamically assigned configuration lease expires. On the other hand, a static configuration is permanent, and it’ll remain assigned until you change it.

Regardless of the reason, Windows 10 offers multiple ways to configure a static network configuration through the Settings app, the legacy Control Panel, and the command line using Command Prompt and PowerShell.

In this guide , I will teach you the steps to set a static IP (version 4) address to a Windows 10 computer.

Set static IP address on Windows 10 from Settings

Set static ip address on windows 10 from control panel.

  • Set static IP address on Windows 10 from Command Prompt
  • Set static IP address on Windows 10 from PowerShell

To assign a static IP address on Windows 10, use these steps:

Open Settings on Windows 10.

Click on Network & Internet .

Click on “Wi-Fi” or “Ethernet.”

Click on the current network connection.

Windows 10 Wi-Fi settings

Under the “IP settings” section, click the Edit button.

Wi-Fi IP settings on Windows 10

Using the drop-down menu, select the Manual option.

Turn on the “IPv4” toggle switch.

Wi-Fi edit IP address settings

Set a static IP address to use by the Windows 10 computer.

Specify a “Subnet prefix length” (subnet mask). If the subnet mask is 255.255.255.0 , the subnet prefix length in bits is 24 .

Specify a “Default Gateway” address.

Specify a “Preferred DNS” address.

Specify an “Alternate DNS address” (if applicable).

Click the Save button.

Wi-Fi TCP/IPv4 static configuration

After you complete the steps, you can test your settings using your web browser to open a website.

To assign a static IP from the Control Panel on Windows 10, use these steps:

Open Control Panel .

Click on Network and Internet .

Click on  Network and Sharing Center .

Click the Change adapter settings option on the left navigation pane.

Control Panel's Network and Sharing Center

Right-click the Wi-Fi or Ethernet adapter and select the Properties option.

Select the “Internet Protocol Version 4 (TCP/IPv4)” option.

Click the Properties button.

Control Panel's network adapter properties

Select the “Use the following IP address” option.

Set the static IP address for the adapter – for example, 10.1.2.220 .

Specify a Subnet mask . (Typically, on a home network, the subnet mask is 255.255.255.0 .)

Specify a Default gateway . (Usually, your router’s IP address. For example, 10.1.2.1 .)

Under the “Use the following DNS server addresses set Preferred DNS server” section, set the Preferred DNS server address. (Usually, your router’s IP address or server IP address that provides the DNS resolution, such as 10.1.2.1 ).

(Optional) Specify an Alternative DNS server. (The computer will use this address if it cannot reach the preferred DNS server.)

Click the OK button.

Windows 10 network adapter TCP/IPv4 properties

Click the Close button again.

Once you complete the steps, you can open your web browser and load a website to see if the configuration works.

Set static IP address on Windows 10 from Command Prompt

To set a static IP address on Windows 10 from Command Prompt, use these steps:

Open Start .

Search for Command Prompt , right-click the top result, and select the Run as administrator option.

Type the following command to see your current networking configuration and press Enter :

Under the network adapter, note the name of the adapter as well as the following information in these fields:

  • Subnet mask
  • Default Gateway
  • DNS Servers

Windows 10 ipconfig command

Type the following command to assign a static IP address on Windows 10 and press Enter :

In the above command, replace “Ethernet0” with the name of your network adapter. Change “10.1.4.220 255.255.255.0 10.1.4.1” with the device IP address, subnet mask, and default gateway address corresponding to your network configuration.

Type the following command to set a DNS server address and press Enter :

In the command, make sure to change “Ethernet0” with your adapter’s name and “10.1.4.1” with the DNS server address of the network.

Type the following command to set an alternate DNS server address and press Enter :

In the command, replace “Ethernet0” with your adapter’s name and “8.8.8.8” with an alternate DNS server address.

Windows 10 netsh command to set static IP address

After you complete the steps, you can test the new configuration using the ping command (for example ping google.com ) to see if the internet is working. Alternatively, you can open a website to see if the configuration works.

Set static IP address on Windows 10 from PowerShell

Windows 10 also includes the PowerShell command line platform that allows you to use the “NetTCPIP” module to manage networking settings, including the ability to change your computer’s IP address settings. Microsoft recommends using this command-line method instead of netsh .

To set a static IP address from PowerShell, use these steps:

Search for PowerShell , right-click the result, and select the Run as administrator option.

Type the following command to view your current network configuration and press Enter :

After running the command, note the following information: 

  • InterfaceIndex
  • IPv4Address
  • IPv4DefaultGateway

PowerShell's Get-NetIPConfiguration command

Type the following command to set a static IP address and press Enter :

PowerShell's New-NetIPAddress command

In the command, replace the “InterfaceIndex” number (5) with the corresponding number of your adapter. Change “IPAddress” with the static IP address you want to assign to your device. Change PrefixLength (subnet mask) with the correct bit number if necessary. Typically, on a home network, the setting is “24.” Also, change the “DefaultGateway” option with the default gateway address of the network.

Type the following command to assign a DNS server address and press Enter :

PowerShell's Set-DNSClientServerAddress command

If you need to set a secondary DNS server address, use a comma to use the same command with another address. For example:

In the command, replace the “InterfaceIndex” number (5) with your network adapter’s corresponding number. Also, change “ServerAddresses” with the DNS IP address.

After you complete the steps, you can test the new configuration by opening your web browser and navigating a website.

Whatever method you use, assigning an IP address within the network range and outside of the DHCP server scope is recommended to allow proper connectivity and avoid address conflicts. If multiple devices share the same address, this will cause a networking conflict, preventing connection to the internet.

Update December 20, 2023: This guide has been updated to ensure accuracy and reflect changes to the process.

Avatar for Mauro Huculak

Mauro Huculak is a Windows expert and the Editor-in-Chief who started Pureinfotech in 2010 as an independent online publication. He is also been a Windows Central contributor for nearly a decade. Mauro has over 12 years of experience writing comprehensive guides and creating professional videos about Windows, software, and related technologies, including Android and Linux. Before becoming a technology writer, he was an IT administrator for seven years. In total, Mauro has over 20 years of combined experience in technology. Throughout his career, he achieved different professional certifications from Microsoft (MSCA), Cisco (CCNP), VMware (VCP), and CompTIA (A+ and Network+), and he has been recognized as a Microsoft MVP for many years. You can follow him on X (Twitter) , YouTube , LinkedIn and About.me .

  • How to revert back to Windows 10 from Windows 11
  • How to disable Fast Startup on Windows 11, 10

We hate spam as much as you! Unsubscribe any time Powered by follow.it ( Privacy ), our Privacy .

Something went wrong. Wait a moment and try again.

XDA Developers

How to set a static internal IP in Ubuntu

Quick links, how to set static internal ip in ubuntu using the gui, how to set static internal ip in ubuntu using the terminal and text editor.

There comes a time when you might have to configure Ubuntu or any other Linux distribution with a static IP address. While you can't change your external static IP address, since it's the one your internet service provider provides, you can change your internal one. This is the IP address used on your network inside your home or office.

Though many tasks on Ubuntu usually require you to visit the terminal app and deal with lines of text, changing your internal IP is easy. You can do this through the settings app and the Graphical User Interface (GUI). Of course, if you want, you can also swap things out by going through the terminal. Here's how.

Without any technical know-how or knowledge, you can set a static IP in Ubuntu through the settings app. Just note, you will have to use the terminal once to find a range of IP addresses that you can assign. Once you do that, you just tap the Windows Key or the Superkey on your device and search for Settings . Once the app is open, proceed with the steps below.

  • If you're connected to the internet via Wi-Fi, choose Wi-Fi . If you're connected via Ethernet, select Network.
  • Once the interface is open, click the settings icon next to the network you're connected to.
  • From the list of tabs at the top, choose IPv4.
  • Under ipv4 method, be sure to choose Manual.
  • Under Addresses, enter the IP address, the Netmask, and the Gateway you want to use. For finding IP addresses that'll work on your network, you can proceed with the steps below.
  • Open a terminal session. With Ctrl, Alt, and T. Install net-tools with the command sudo apt install net-tools.
  • In this case, we have an inet of 192.168.1.176 and a netmask of 255.255.255.0. We can enter those numbers and can calculate the usable range using this website .
  • When you've calculated the usable range of addresses, choose a valid IP address that falls within this range. Then, you can click Apply at the top.

Any changes you apply will automatically go into effect. If you want, you can also use the terminal to confirm your IP address. Launch it with Ctrl, Alt, and T on your keyboard. Once launched, enter the command ip addr or ip a . You should see an interface IP address listed.

If you're a bit more technical and want to set a static IP in Ubuntu using the terminal, that is possible. You'll have to edit some lines of text and go through a few extra steps, but here's how:

  • Display information about your network. Use the command nmcli connection show. You'll see a network name, a UUID, a Type, and a Device. If this package isn't installed (though it should be, as it comes preinstalled with Ubuntu), then run sudo apt-get install network-manager
  • Note down the range of IP addresses you'll be able to use. Use the command ip addr to find out your machine's current IP address. This tutorial assumes that your network adapter is called enp0s3. If it isn't, then look for the correct one and also change the interface names in the subsequent commands. In the above example, we have an inet of 10.0.2.15, with the /24 denoting that the network uses a 255.255.255.0 subnet mask. In most cases, your usable network range will be whatever is in the first three places of the internal IP address, and then any unused number on your network between 1 and 255 in the last section. For example, we can use 10.0.2.16. If you're unsure, you can enter the subnet mask and your internal IP address into this website to calculate the usable range.
  • Note the IP address of your default gateway with the command ip r. In our example, it's 10.2.2.2.
  • Next, we'll add a new static connection option. Run the following command, making sure to change the numbers after "ip4" and "gw4" depending on your network conditions. These are the IP address you want to change your machine to and the current default gateway, respectively. sudo nmcli con add con-name "static" ifname enp0s3 type ethernet ip4 10.0.2.13/24 gw4 10.0.2.2 In our case, we do the following.
  • Set your DNS, manual DHCP (so, a static IP), and enable the connection. You can do that by running the following commands in succession. nmcli con mod "static" ipv4.dns "1.1.1.1,8.8.8.8" You can swap out the DNS servers above for whatever you want, they are in order of primary and secondary. nmcli con mod "static" ipv4.method manual; nmcli con up "static" ifname enp0s3 Once done, you can run nmcli con show to see if the new connection is enabled. If the output above looks like yours, then you're ready to go!

Setting complete

That's all you need to set up a static IP in Ubuntu. It doesn't take much effort. Remember, we're always writing about Linux, so you can check out our guide to the best Linux laptops should you need one.

How to set a static internal IP in Ubuntu

IMAGES

  1. Step-by-step Guide on How to Setup the JioFi 2 Wireless Router for Jio 4G

    how to setup static ip for jiofi

  2. JioFi

    how to setup static ip for jiofi

  3. Step-by-step Guide on How to Setup the JioFi 2 Wireless Router for Jio 4G

    how to setup static ip for jiofi

  4. All Screenshots for the Jio JioFi 3

    how to setup static ip for jiofi

  5. JioFi 3 Setup, How to connect Easily?

    how to setup static ip for jiofi

  6. How To Configure and Setup Your Reliance JioFi 4G MiFi Device

    how to setup static ip for jiofi

VIDEO

  1. Share your wifi upto 25kms away ft.jiofiber

  2. jio jiofi how to hide your wifi network name or SSID from others

  3. Jio fiber Port forwarding || Airtel Fiber Port Forwarding #shorts #cctvnetworkingtechnicalsupport

  4. Change wifi password of 4G+ MiFi JioFi mobile wifi hotspot dongle

  5. Edimax Router Configuration

  6. How To Assign Static Ip Address From Class Ipv4

COMMENTS

  1. JIO--How tp Set up a Static IP Address in Jio

    Title: JIO - How to Set Up a Static IP Address in Jio (Step-by-Step Guide)Description:In this comprehensive tutorial, we will guide you through the process o...

  2. How to Setup Static IP for Windows PC on JIO JioFi M2

    How to set up Static IP address for Windows PC Before we begin, make sure that you are familiar with your JIO JioFi M2's IP address. If you are unsure how to get that information, please read about it here. Now that you know your router's IP address. Start by opening your router's control panel. Log in to your router.

  3. How to Setup Static IP for Windows PC on JIO JioFi 3

    How to set up Static IP address for Windows PC Before we begin, make sure that you are familiar with your JIO JioFi 3's IP address. If you are unsure how to get that information, please read about it here. Now that you know your router's IP address. Start by opening your router's control panel. Log in to your router.

  4. How to setup and configure JioFi4 Device using JioFi Device IP Address

    How to setup and configure JioFi4 Device using JioFi Device IP Address Satish Tiwary 10.4K subscribers Join Subscribe Subscribed 20K views 5 years ago How to setup and configure JioFi4...

  5. How to Set Up a Static IP Address

    Step 1: Open the Command Prompt Your first step should be to track down your computer's current IP address, subnet mask, and default gateway. Do this by opening the Start menu and searching for...

  6. How To Configure and Setup Your Reliance JioFi 4G MiFi Device

    To activate data services only, dial 1800-890-1977 from any number. Kindly keep documents submitted for Jio connection ready for your reference. Thank you, Team Jio. Step:3 As soon as you receive the second message, call the toll free number at 1800-890-1977 and complete the Tele-verification process.

  7. How to Setup Static IP for PS5 on JIO JioFi M2

    First of all, turn on your PS5. Then go to Settings. Proceed to Set up internet connection. Now, choose WiFi or LAN (depends on the type of connection your PS5 uses), Pick Custom > Manual Enter all of the information from the View Connection Status menu and a static IP address Good job! You've set a static IP address on your PS5!

  8. Internet Services Provider & Broadband Plans for Business

    Jio High Speed Internet (HSI) offers you fiber connectivity with truly unlimited, symmetric internet up to 1 Gbps. Conduct team meetings, stream videos and upload/ download heavy files without glitches on an all IP, future ready network. Dual-band Wi-Fi gives you superior indoor coverage to quickly setup your office and improve productivity as ...

  9. JioFi Portable Hotspot Router for Enterprise & Business

    Router M2S black Connect Device Recommended 10 (Wi-Fi) + 1 (USB tethering) Standard WAN: LTE (2300/1800/850 MHz), IEEE 802.11b/g/n 2.4GHz only Power Supply AC: 100-240V; DC: 5V&1A Dimensions - 85 X 55 X 16 mm Micro-SD Card, Micro-USB Port, Nano SIM Battery Capacity - 2300 mAh What you get with JioFi

  10. How do I use my JioFi device?

    1. Insert the battery and the activated Jio SIM in your JioFi 2. Switch it ON 3. Turn on Wi-Fi on the consumption device you wish to use (laptops, tablets, mobile phones, gaming devices, cameras, smart TVs) 4. Search for available Wi-Fi networks

  11. JIO JIOFI MANUAL Pdf Download

    During sleep mode, the SSID of your JioFi will stop broadcasting and a breathing light can be seen on the power button. Page 12: Manage Your Device Customize network, wifi and other parameters and access SD card over wifi using the web configuration utility. You can also customize some settings by accessing the JioFi widget.

  12. How to Assign a Static IP Address in Windows 10 or Windows 11

    Key Takeaways. To set a static IP address in Windows 10 or 11, open Settings -> Network & Internet and click Properties for your active network. Choose the "Edit" button next to IP assignment and change the type to Manual. Flip the IPv4 switch to "On", fill out your static IP details, and click Save. Sometimes, it's better to assign a PC its ...

  13. JioFibre Router Configuration LAN IP Changing, From 192.168 ...

    Hi Viewersyour are always free to call and ask about any requirementRegarding my Videofor any Help regarding hardware and softwareESSL Attendance machine | B...

  14. How to configure a static IP on Windows 10 or 11

    Configure IP from Settings app. To assign a permanent TCP/IP configuration on Windows 11, use these steps: Open Settings. Click on Network & internet. (Optional) Click on Advanced network settings ...

  15. How to Obtain and Set Up a Static IP Address

    Select IPv4 and toggle to on. It's a simple process to switch to a static address, and for businesses and individuals with more complicated internet needs, it's a great decision. Enter the static IP address. Enter 24 in the Subnet prefix length field.

  16. Does Jiofi provide static IP?

    How do I get a static IP? How do I set a static IP address in Windows? Click Start Menu > Control Panel > Network and Sharing Center or Network and Internet > Network and Sharing Center. Click Change adapter settings. Right-click on Wi-Fi or Local Area Connection. Click Properties. Select Internet Protocol Version 4 (TCP/IPv4).

  17. Configure DHCP on JIO JioFi 3, How To

    How to configure DHCP on JIO JioFi 3. First off, open your router's admin login page, and log in. Find and enter the DHCP section. You should see a button that will Enable DHCP on your JIO JioFi 3. Now pick the IP range from which DHCP will pick IP addresses (for example 192.168.1.2 - 192.168.1.80) to assign to devices connected to the network ...

  18. How to Set a Static IP on Windows 11 [Manually]

    Navigate to Network & internet and click Open. Click on Wi-Fi and find your current connection. Click on Edit IP settings and select Manual settings. Toggle on the IPV4 button. Set a static IP address from the details in solution 1 and click the Save button. 2. Use Control Panel to set a static IP in Windows 11.

  19. How to set static IP address on Windows 10

    Set static IP address on Windows 10 from Settings. To assign a static IP address on Windows 10, use these steps: Open Settings on Windows 10. Click on Network & Internet. Click on "Wi-Fi" or "Ethernet.". Click on the current network connection. Under the "IP settings" section, click the Edit button. Using the drop-down menu, select ...

  20. Setup Media and Print server using JioFiber router and Raspberry Pi

    Step 3: Configure CUPS. With Installation done, its time to check out the configuration file of CUPS. ... Add a static IP address and details of the router, and DNS server to the bottom of the ...

  21. DNS Settings on JIO JioFi 3, How To

    Go to the Setup page or DNS. Now, you should be able to find Static DNS and Static DNS 2 fields, you must enter the Primary DNS Server you want to use into the first DNS field, and the secondary DNS server into the second one. If there's an option, you may want to add the third Static DNS. If everything's set, save your changes. Good job!

  22. Quora

    We would like to show you a description here but the site won't allow us.

  23. How to set a static internal IP in Ubuntu

    If you're connected to the internet via Wi-Fi, choose Wi-Fi.If you're connected via Ethernet, select Network.; Once the interface is open, click the settings icon next to the network you're ...

  24. Configure VPN on JIO JioFi M2, How To

    Configure VPN on JIO JioFi M2: Create the best VPN account, to get your login and password to access the VPN network. Next, you need to log in to the router and check how to Open Admin Page. Now go to the Advanced tab. From the list choose VPN Server and PPTP VPN. Here you can change the Client IP Address, Username and Password.