How to Fix an Incorrect CPU Usage in the Windows Task Manager

Does the Task Manager list strange CPU usage for an app? Try these fixes to get things back to normal.

Imagine you’re working on your computer when suddenly your Task Manager reports that one of the processes is using an abnormally large amount of CPU. But when you look further, you realize that the process uses a fraction of what it originally reported. You think it could be a virus or malware, but you’re not sure. Of course, it's Task Manager itself that gives you incorrect reports.

So what will you do now? Fixing Task Manager reporting wrong CPU usage is tricky, but there's a way out. In this article, we’ll discuss how to fix Task Manager reporting wrong CPU usage.

1. Try Some Basic Windows Fixes

Before we get started with the complex steps, here are some simple Windows-based tips you can try first.

Restart Your PC and Check CPU Usage Again

If Task Manager reports incorrect CPU usage, restart your computer first. It seems like an obvious solution, but restarting your computer often fixes the problem. It refreshes the system and clears out any temporary files or processes running. When the computer starts back up, open Task Manager again to see if CPU usage is reported correctly.

Check for Any New Windows Updates

Windows updates often fix bugs that report incorrect CPU usage. If your system isn’t already set to automatically install updates, manually check for them.

To do this, check out our guide on how to update Windows manually .

Scan for Malicious Programs

Malicious programs and malware often cause CPU usage problems. To check Task Manager's reports, you must scan your computer to find and remove suspicious programs.

If you have a third-party antivirus suite, consult its documentation for further instructions on how to scan your PC, and what each type of scan does. If you're using the Windows antivirus built into the operating system, check out how to remove malware using a Microsoft Defender offline scan to give your PC a deep clean.

2. Restore Power Plan Settings to Default

Incorrect power plan settings can also cause inaccuracy in CPU reports. To fix this, you must restore the power plan settings to default values. Here's the process:

Power Options in Control Panel

After the power plan settings are restored to default, close the window and check if Task Manager still reports an incorrect CPU usage.

3. Run the Memory Diagnostic Tool

If you're still experiencing abnormal CPU usage in Task Manager, try running the Memory Diagnostic Tool. This tool helps identify memory-related issues that might cause the incorrect CPU usage report.

To run the Memory Diagnostic Tool, open the Run dialog box first. Then type MDSched in the text box and press Enter.

Run the Memory Diagnostic Tool

You'll see a dialog asking you to restart your computer and check for problems. Click Restart Now if you want to start the tool immediately. If you want to postpone it, click the second option - Check for problems the next time I start my computer .

After restarting, the Memory Diagnostic Tool will run automatically and fix any memory-related issues. Once it's finished, check if Task Manager still reports incorrect CPU usage.

4. Change the Misbehaving Process' Priority

If the above methods don’t work, chances are one of the processes is misbehaving and causing Task Manager to report incorrect CPU usage. To fix this, you need to change its priority. Here’s how to do it:

  • Right-click on the Taskbar and select Task Manager from the context menu. You can also press Ctrl + Shift + Esc on your keyboard for direct access.
  • In the Task Manager window, find the process using abnormally high CPU usage. Right-click it and select Go to details .

Set Priority High to Processes

This will give the misbehaving process a higher priority than the other processes. After changing the priority, check if Task Manager still reports incorrect CPU usage.

5. Disable Unnecessary Startup Programs

While Task Manager is a powerful tool for monitoring system resources, sometimes it reports incorrect CPU usage due to unnecessary startup programs. These programs start automatically when you boot your computer and take up resources in the background. In that case, disable these unnecessary programs and see if it solves the problem.

  • Click on Start and search for Settings .
  • Select the top result to open the settings app.
  • In the left sidebar of the Settings window, click on Apps .

Disable Unnecessary Startup Programs

  • Find any unnecessary programs and toggle the switch to disable them.

This will stop those apps from starting when you boot up your computer. After disabling the startup programs, close the settings window and check if Task Manager still reports incorrect CPU usage.

6. Reset Your Computer to Factory Settings

It looks like none of the above methods worked, and you’re still experiencing inaccurate CPU usage reports. If so, reset your computer to factory settings . Please note that this action will delete all data on your computer. So before you begin, back up all your critical data on Windows .

Fixing Incorrect CPU Usage Reports in Task Manager

Now that you know how to fix inaccurate CPU usage reports in Task Manager, it's easy to diagnose and solve CPU-related issues. Follow the tips above to get accurate CPU usage reports quickly.

AMD's NPUs will finally get support from Windows' Task Manager

Finally, AMD fans get the support they need.

Key Takeaways

  • Microsoft will soon support AMD NPUs in Task Manager.
  • NPUs aid AI-based processes, separate from CPUs and GPUs.
  • NPU implementation is important for monitoring and optimizing system performance when training or using AI.

For a little while now, Microsoft and Intel have enjoyed a good partnership. DirectML is coming to Intel NPUs , and for a little while, those with AMD processors were seemingly left in the cold. Now, Microsoft has finally shown the Intel rival some attention by giving AMD support for the Task Manager.

AMD Ryzen 7 8700G packaging

AMD Ryzen 7 8700G review: The best gaming CPU for those on a budget

Amd npu support is making its way to microsoft's task manager.

As reported by Neowin , AMD NPUs will finally show up in Windows' Task Manager. If you're not sure what an NPU is, it's a new component to computers to aid with processing. Much like how the CPU handles regular processes and GPUs are dedicated graphics processors, NPUs are specially used for AI-based processes.

With this agreement, AMD's NPUs will now use the Microsoft Compute Driver Model (MCDM). Part of this implementation means you can keep tabs on how the NPU is doing and how much processing power it's using via Task Manager, which will be particularly important when people begin using their NPUs for strenuous AI-based tasks. As AMD puts it:

Being able to track how resources are allocated in real-time and which system components are under load is useful for monitoring application behavior. This kind of tracking is particularly important in notebooks where end users may choose to maximize battery life by controlling where certain workloads run or adjusting global power settings either via the Windows Settings menu or in an OEM-provided application.

NPU implementation is going to be vital in the coming months. With AI PC s entering the consumer market, Microsoft will ideally support as many different NPU brands as possible so people aren't left out because of their choice of hardware.

How-To Geek

How to keep the task manager's cpu stats in your system tray.

Windows 10 has a CPU usage meter you can see in your system tray. It's part of the Task Manager---here's how to set it up.

Quick Links

How to open the task manager, how to find the tray icon, how to hide the task manager from your taskbar.

The Windows Task Manager has floating performance panels , but it also has a system tray icon that displays CPU usage. Here's how to use it---and how to free up taskbar space so the Task Manager's window shortcut will get out of your way.

This trick works on Windows 10, but it's been around for a long time. It will work on Windows 7 or even Windows XP, too.

To find this feature, you just need to open the Task Manager . You can do this in several ways: Press Ctrl+Shift+Esc, right-click the taskbar and select "Task Manager," or press Ctrl+Alt+Delete and click "Task Manager."

Opening the Task Manager from the taskbar.

Related: Seven Ways to Open the Windows Task Manager

The Task Manager will show a little CPU usage meter icon in your notification area, also known as the system tray, to the left of the clock.

The icon will always show a meter representing current CPU usage. For current memory, disk, and network usage, you can mouse-over the icon and you'll see a tooltip.

Like any other notification are (system tray) icon, you can drag and drop the icon to move it to the left or right in the line of icons on the taskbar.

The Task Manager's CPU usage meter in the Windows system tray.

The higher your PC's current CPU usage, the more the meter in the icon will fill up.

High CPU usage shown in the Task Manager's icon on Windows 10's taskbar.

If you don't see the Task Manager's icon in the tray area on your taskbar, click the arrow at the left side of the notification area and then drag the CPU usage icon to the notification area on your taskbar.

Unhiding the Task Manager notification area icon on Windows 10.

Related: How to Show Windows 10's Hidden Floating Performance Panels

If you want this useful icon in your notification area all the time, you'll need to leave the Task Manager open. But, with the Task Manager open, its application icon will appear as a running program on your taskbar.

You can hide that icon.

The Task Manager's taskbar shortcut icon.

To do so, click over to the Task Manager window and click Options > Hide When Minimized.

Enabling "Hide when minimized" for the Windows taskbar.

After checking this option, click the Minimize icon at the top-right corner of the Task Manager window.

Minimizing the Task Manager and hiding it from Windows 10's taskbar.

The Task Manager icon will vanish from the running programs on your taskbar, but it will still appear in your system tray. (If you still see it, right-click the taskbar shortcut and select "Unpin From Taskbar.")

To reopen it, double-click the CPU usage icon in your tray or just launch the Task Manager in one of the usual ways.

To close the Task Manager, right-click the tray icon and select "Close"---or just re-open the Task Manager window and click the "X" button to close it instead of minimizing it.

Related: Windows Task Manager: The Complete Guide

AMD confirms AI NPU monitoring is coming to Windows Task Manager

Intel already has Task Manager support, now it's AMD's turn.

AMD

AMD confirmed that system monitoring of its XDNA Neural Processing Units (NPUs) is coming shortly to Windows Task Manager through Microsoft's Computer Driver Model . Currently, Windows 11 can only monitor the NPU units in Intel's new Core Ultra Meteor Lake CPUs , but that will change once these updates come in. An exact release schedule was not disclosed, but it is reasonable to assume AMD is probably targeting integration with Microsoft's next AI -focused patch, Windows 11 24H2 . AMD will be using Microsoft's Compute Driver Model (MCDM) to enable Windows 11 to monitor AMD's XDNA NPUs utilization. MCDM is an offshoot of the Microsoft Windows Display Driver Model (WDDM) that is designed specifically for compute-only microchip processors like an NPU . According to AMD, MCDM also enables Windows to manage the NPU, including power management and scheduling similar to the CPU and GPU . This will be important as NPU adoption grows and multiple programs try to run on the NPU simultaneously. If AMD's implementation is like Intel's implementation, Task Manager will show the compute and copy utilization of the NPU in two separate graphs along with the total and shared amount of memory the NPU is utilizing. These first-generation implementations don't have any dedicated memory, so they will share system RAM . But if future iterations do implement dedicated NPU memory, Task Manager should show that as well, similar to the GPU. AMD says that Task Manager NPU monitoring will be very important for the future of computing. It believes that NPU monitoring can make software development easier, as well as improve user device optimization, like maximizing battery life. We are in the infancy of NPU support, but we could very well see many AI-assisted programs being run on these new AI-focused processing units. The main advantage of Neural Processing Units is their localized hardware acceleration capabilities, enabling AI programs to run on the local machine itself (as Nvidia demonstrated with Chat with RTX ) compared to a cloud-based solution that can be slower and leak confidential information. NPUs also allow AI workloads to run in environments where there is no internet connection, or where internet service is spotty or unreliable. AMD is already on its second-generation NPU architecture dubbed XDNA2. The first implementation debuted with AMD's Ryzen 7040 Phoenix CPUs in 2023, featuring 10 TOPS (INT8 teraops) of performance. AMD's XDNA2 version is three times faster and comes in the newer Ryzen 8040 series Strix Point mobile CPUs . AMD's desktop Ryzen 8000G APUs also feature its NPU, but they are all based on AMD's older Phoenix architecture sporting its first generation XDNA chip.

Stay on the Cutting Edge

Join the experts who read Tom's Hardware for the inside track on enthusiast PC tech news — and have for over 25 years. We'll send breaking news and in-depth reviews of CPUs, GPUs, AI, maker hardware and more straight to your inbox.

Aaron Klotz

Aaron Klotz is a freelance writer for Tom’s Hardware US, covering news topics related to computer hardware such as CPUs, and graphics cards.

Huawei's new CPU matches Zen 3 in single-core performance - HiSilicon Taishan V120 server CPU benchmark

Early Snapdragon X Elite benchmark shows Arm CPU is faster than AMD's top-end mobile APU

Notebook for prison inmates bought on eBay - 'Justice Tech Solutions Securebook' is locked down but has freedoom-loving Linux

  • Amdlova "IA" backdoors Reply
Amdlova said: "IA" backdoors
usertests said: It's interesting because it can cut both ways. Having dedicated machine learning hardware on your machine can allow you to run "AI" stuff locally, with no connection to remote machines where your data is being slurped. You can play with your uncensored local LLMs or Stable Diffusion generation. Maybe it can be used for locally run voice-activated assistants (like Mycroft instead of Alexa) and so on. On the other hand, now there's a low-power accelerator that most people may not use 99% of the time, that can be used to do inference tasks in the background to spy on the machine, without taking up other resources. Instead of reporting to the spy cloud constantly, it can wait until it analyzes something suspicious or illegal and send the evidence in one burst. Maybe malware could be programmed to use it to give itself more adaptability than before, again without noticeably impacting system usage and battery life. So really, not much will change. People with low understanding of their computer/OS will get screwed by it.
Joseph_138 said: You know people will be using it to generate AI nudes, without having to log in to a website, right?
  • View All 4 Comments

Most Popular

By Christopher Harper February 24, 2024

By Matthew Connatser February 24, 2024

By Anton Shilov February 24, 2024

By Roshan Ashraf Shaikh February 24, 2024

By Mark Tyson February 24, 2024

By Christopher Harper February 23, 2024

Sign up for our daily newsletter

  • Privacy Policy
  • Advertise with Us

100% CPU Usage in Windows? Here’s How to Fix it

Farhad Pashaei

We’ve all been there. You turn on your PC, and instead of getting straight to work, you’re faced with horrific slowdown and loud-running fans. Hit Ctrl + Shift + Escape , and you will see that your CPU usage is inexplicably at 100%.

It’s a common problem that’s, luckily, not usually too hard to solve. Here are several fixes for the 100% CPU usage problem in Windows.

Note: If you notice high CPU usage for a specific process, like the Microsoft Compatibility Telemetry or Windows Modules Installer Worker , try the fixes for those particular issues.

Reasons for High CPU Usage in Windows

Basic fixes, disable sysmain (formerly known as superfetch), restart the wmi provider host, check your power supply, 100% cpu usage in games, disable third-party antivirus software, disable automatic startup applications, defragment your hard drive, disable cortana, turn windows notification settings off, frequently asked questions.

There are many factors that can cause 100% CPU usage in Windows. You should try to find out the cause first before attempting to fix it.

Here are some of the reasons why your CPU gets overloaded:

  • Background Processes: Processes that are constantly running in the background can cause many problems. You should monitor hidden processes that are constantly running.
  • WMI Provider Host: The WMI Provider Host process is an essential part of the Windows operating system that helps organize, monitor, and troubleshoot different aspects of your computer. Sometimes it could malfunction and lead to various complications.
  • Malware Infection: malware infection is often the main cause of 100% CPU usage. At worst, it can cause your computer to break down and cannot run properly.

Try these basic fixes first to see if it fixes the high CPU usage issue:

  • Restart your Windows : The first solution, in order, is the simplest and often the most effective one. Restarting the computer can clear out temporary files and resolve the slowdown due to long-running processes.
  • Update your Drivers: Suboptimal and old drivers can drag down your system. Updating your drivers may eliminate the bugs that might have existed. Search “Windows update” in your search bar and select it. In the opened window, click “Check for updates.” You’ll find out if any new updates are available.
  • Scan for Viruses: Malware and viruses can clog your system and cause it to run hot by putting a heavy duty on your CPU and impacting your system’s overall performance. Using your system’s Windows Defender or a reliable third-party anti-malware software , search your system for any malware or corrupted files that may have found their way into it.

If the basic fixes above didn’t do the trick, dig a little deeper with the more advanced approaches below.

SysMain is a process by which Windows learns which apps you use most often, then pre-fetches them for you so they load quicker each time you use them. It’s a constant background process that rarely causes problems but doesn’t always play nice with older devices. That used to be known as Superfetch in older versions of Windows.

Here’s how to disable SysMain:

  • Right-click your “Start menu” and select “Task Manager.”

Open Task Manager 1

  • Click “More details” to expand the window.

Click More Detail To Expand The Window

  • Select “CPU” to order processes by how much CPU they use.

Sort By Cpu

  • Right-click “Service Host: SysMain,” and choose “End process.”

End Sysmain Process

Alternatively, here’s how to turn it off permanently:

  • Click on the “Start menu,” type “Services,” and press Enter .

Search Services

  • Right-click “SysMain,” and select “Properties.”

Go To Properties

  • Open the drop-down next to “Startup type,” choose “Disabled,” and select “OK.”

Disable It

You can technically do this to any service that’s hogging the CPU. However, some services are system-critical, so you need to be careful. Another culprit of high CPU usage is “Windows Search,” which you can safely turn off.

The WMI (Windows Management Instrumentation) Provider Host is a core service on Windows that links up with various software on your PC to send information about your operating system. In other words, it’s a critical process, and you shouldn’t disable it lightly. If you see in the Task Manager Processes tab that it’s using a lot of CPU, you should do something about it.

Here’s how to restart the WMI Provider Host:

Search Services 2

  • Right-click “Windows Management Instrumentation” and select “Restart.”

Restart Wmi

If that doesn’t work, then the next solution is more intricate but also has the potential to offer more long-term benefits for your CPU.

If your 100% CPU usage is due to the WMI Provider Host process in Task Manager, you can identify its source by following these steps:

  • Right-click your “Start menu” and open “Event Viewer.”

Right Click On Start Menu And Select Event Viewer

  • Expand “Applications and Services Logs,” open the “Microsoft” folder, then click “Windows.”

Steps To Go Applications And Service Logs Then Go To Microsoft Then Go To Windows

  • Scroll to “WMI-Activity,” and click “Operational” in the drop-down.

Go To Wmi Activity And Then Operational

  • Find and highlight an “Error” in the logs, and take the “ClientProcessId” from the “General” tab.

Find Client Id Process

  • Return to “Task Manager,” go to the “Details” tab, sort the processes by “PID,” find and right-click the process with the error, and select “Open file location.” That will give you an idea of the software the process is attached to and whether you can reinstall it, uninstall it, update its drivers, etc.

Sort By Pid Find The App Causing The Errors Right Click And Open File Location

There may be multiple errors like this in the WMI Provider Host, so you should repeat the above process to address the different errors. It’s also possible that just one app/process has been hogging your CPU all this time, so you should be good to go after you’ve dealt with the culprit.

3. Adjust Your Power Plan

Twiddling around in Windows power options can substantially affect your PC performance. If set to “High performance” – mainly if you made tweaks to the “plan settings” – then it’s possible that you’re overloading your CPU. (Again, older devices are susceptible to this.)

Here’s how to reset your power plans:

  • Right-click your “Start menu” and open “Settings.”

Right Click On Start Menu And Select Setting

  • Go to the “System” tab and click “Power & battery.”

In System Select Power And Battery

  • Change “Power mode” to “Best performance.”

Set To Best Performance

This one’s an issue that can affect both desktop and laptop Windows users. When you have a faulty power supply, it can automatically start undervolting your CPU to preserve power.

When undervolted, your CPU can function at only a fraction of its total capacity; hence the possibility of this manifesting as 100% CPU usage on Windows.

To solve this on a laptop is quite simple:

  • Unplug your device from the power cable.
  • Then follow our instructions in the previous section to set its power plan to “Best performance.”

If the issue was with your power supply, the CPU usage should return to normal in the Task Manager.

100 Cpu Usage Windows 10 Check Psu

Things can be more complicated on a desktop, as you’ll need to physically remove the PSU from your PC and test a different one. We recommend going through our other tips listed below before trying this.

Most games tend to be GPU-intensive rather than CPU-intensive, so shouldn’t really be hammering your CPU too hard. So if you run a game and shoot up to 100% CPU usage, there might be a problem you have to intervene in as it can cause performance bottlenecks and an ugly “dragging” effect.

Before the game-specific tips below, you should try temporarily turning off real-time protection in Windows Defender when you play, as some people have reported this to cause high CPU usage while gaming.

Right Click On Start Menu And Select Setting 2

  • Go to the “Privacy & Security” tab and select “Open Windows Security.”

Go To Privacy And Security And Select Windows Security

  • Click “Virus & threat protection” and open “Manage settings.”

Click On Virus Protection

  • Switch “Real-time protection” to “Off.”

Turn Off Real Time Protection 1

Here, switch the “Real-time protection” slider to “Off.” We recommend you switch this back on after gaming.

Fix 100% CPU Usage in Warzone

Activision Blizzard’s free-to-play battle royale game – a kind of standalone expansion to Call of Duty: Modern Warfare – isn’t terribly well optimized, and to fix its high CPU usage problem you need to play around in Task Manager.

  • Right-click your “Taskbar” and choose “Task Manager.”

Right Click On Taskbar And Open Task Manager

  • Click the “Details “tab, then right-click “ModernWarfare.”
  • In the context menu, go to “Set priority” then change the game’s priority to “High.”

Fix 100 Cpu Usage Windows Gaming Warzone

Note : If you’re experiencing high CPU usage in other games, this tip may also solve that problem.

Fix 100% CPU Usage in Apex Legends

High-flying battle royale game Apex Legends should not be rinsing your CPU, but if it is, then the good people of the gaming community have a good workaround for you.

The most popular fix for high CPU usage while playing Apex Legends involves going to the game’s graphics settings and taking a look at your v-sync settings:

  • If your v-sync is disabled, switch it to “Dynamic,” apply, then switch back to Disabled.
  • Conversely, if your v-sync mode is different, switch to an alternative v-sync mode and switch back again. That should do it.

This one may be a bit contentious, but our view is that if you’re using antivirus software on Windows, you’re probably putting unnecessary strain on your CPU (mainly if it’s older). The extra security doesn’t usually hurt, but you probably don’t need it.

Every year we write an in-depth feature about Windows’ onboard security software, Windows Defender , and it gets better yearly. At this point, it’s more or less on par with the best antivirus software out there.

Feel free to disable your third-party antivirus software to see if it helps your CPU usage. If it does, uninstall it because Windows Defender should have you covered. It may also run hot with high CPU usage, so we’ve devised many ways to decrease the CPU temperature . Ransomware is also a big culprit in slowing down your PC and heating your CPU, so here’s how to enable ransomware protection in Windows .

Applications that startup automatically when your Windows boots can slow down your system significantly, both in the booting process and during everyday use, as they stay open in the background without your knowledge and use your hardware resources. To rid yourself of this slowdown:

Click More Detail To Expand The Window 2

  • Go to the “Startup” tab, highlight any app you don’t want to start automatically, then select “Disable.”

Disable Startup Apps

The defragmentation tool in your Windows is one of the most valuable tools to resolve the slowdowns that have occurred. Follow these steps to defragment each drive on your hard disk:

  • Click on the “Start menu,” type “Defragment and Optimize Drives,” and press Enter .

Click On The Start Menu Type Defragment And Optimize Drives And Press Enter

  • Pick the disk drive you wish to optimize and select “Optimize.”

Defragment Each Drive 1

Although Cortana is a valuable voice assistant in Windows computers, it’s always been the primary reason behind several issues with the OS. Accordingly, Microsoft’s lovely voice assistant might be responsible for overloading your CPU; if so, you can fix it using the Windows Registry Editor.

Caution: The Registry Editor is a critical database in Windows computers and could permanently damage your OS if you modify it incorrectly. It’s best to back up the Registry before moving on.

  • Right-click your “Start menu” and open “Run.”

Right Click On Start Menu And Select Run

  • Type “regedit” in the Run window and click “OK.”

Type Regedit In The Run Window And Click Ok

  • Confirm the “UAC” prompt by clicking “Yes.”

Confirming The Uac Prompt

  • Go to the following directory, right-click the “Start” entry, and select “Modify”:

Go To The Following Directory Right Click The Start Entry And Select Modify

5. Change “Value Data” to 4 and click “OK.”

Change Value Data To 4 And Click Ok

Windows notification is the next suspect in line for overloading your CPU. While notifications are a primary part of every OS, they could clog the performance by consuming too much CPU capacity. If so, disabling it should do the trick.

Right Click On Start Menu And Select Setting Copy

  • Go to the “System” tab and select “Notifications.”

Go To The System Tab And Select Notifications

  • Turn off the toggle next to “Notifications.”

Turn Off The Toggle Next To Notifications

Does the CPU improve FPS?

Yes, Although the FPS you experience in each game depends highly on your GPU, your CPU can also play an important role. Updating your CPU or closing the open tasks in the background that might hold down and demand processing from your CPU can improve your frame rate per second to up to double the amount.

Does RAM affect CPU usage?

Of course. Your RAM assists your CPU in faster processing of the files and tasks, helping it run more processes simultaneously. If you upgrade your RAM to a quicker version or one with more capacity, it will aid your CPU significantly, allowing it to go through different processes more conveniently.

Our latest tutorials delivered straight to your inbox

Farhad Pashaei

As a technophile, Farhad has spent the last decade getting hands-on experience with a variety of electronic devices, including smartphones, laptops, accessories, wearables, printers, and so on. When he isn’t writing, you can bet he’s devouring information on products making their market foray, demonstrating his unquenchable thirst for technology.

Featured image depicting OneDrive being turned off on a Windows device. Image courtesy Freepik.

Windows Task Manager To get NPU Monitoring with AMD Ryzen 8040 Series

Published 2024-02-21 16:11 by Hilbert Hagedoorn

teaser

AMD has worked with Microsoft to support the Ryzen 8040 Series processors with NPUs through the Microsoft Compute Driver Model (MCDM), an extension of the Windows Display Driver Model (WDDM) for non-GPU compute devices. MCDM utilizes the GPU device management framework for various tasks, including scheduling and power management, to efficiently manage AI workloads on NPUs.  Monitoring NPUs in real-time allows for better management of resources and system load, crucial for applications in portable devices where battery optimization is essential. Users can adjust settings to manage power consumption and workload distribution.

The inclusion of NPUs in the Ryzen 8040 processors facilitates the creation of AI-enhanced applications and experiences by vendors. Real-time monitoring simplifies software development and benefits developers, system vendors, and end-users.  The addition of NPU monitoring to Task Manager reflects the increasing importance of such components in computing, similar to the introduction of GPU monitoring in 2017. It shows Microsoft's commitment to evolving Windows to accommodate the growing complexity of PCs and expanding the range of components it can monitor, enhancing Task Manager's functionality and signaling the importance of NPUs in future computing.

Image

AMD's effort to enable NPU monitoring in the Ryzen 8040 series with Microsoft is part of its broader commitment to advancing AI development on x86 platforms, including AI-focused initiatives and discussions on AMD's AI architecture and NPU designs.

Share this content

Timeline and Specifications of AMD Zen 5 Architecture CPUs

Moore Thread MTT S30 graphics cards becomes available, AV1 Decode , Direct3D API

task manager 0 cpu

essanews.com

Windows 11 Task Manager to monitor Neural Processing Unit load on AMD processors

W hile the Task Manager in Windows 11 is not one of the most frequently updated system applications, beneficial changes do occur occasionally. Recently, the focus has primarily been on visual updates. However, technical innovations have also surfaced, including the significant addition of NPU load monitoring in the latest processors. As of now, this feature is only compatible with Intel hardware.

As reported by Tom's Hardware, NPU load monitoring will soon be available for computers with the latest AMD processors . The NPU is a chip specialized for artificial intelligence calculations. In Windows 11, plenty of applications will utilize this feature, including a forthcoming one that generates additional frames to assist the GPU.

In the following months and years, NPU monitoring could become a significant component of diagnostic and component analysis in computers. AMD believes that incorporating these units into CPUs is a groundbreaking advancement, predicting that a large portion of software will soon rely heavily on the computational power of NPUs.

The release of the proposed 24H2 Windows 11 version, which includes the new AMD processor monitoring option, is slated for the second half of 2024.

Windows 11 24H2 update to explore AI utilization with 'super resolution' feature

Microsoft Build 2024 Conference to focus on artificial intelligence and Copilot in Windows 11

Error in Windows. Random printer switch to "HP M101-M106"

amd, blue, card, cards, case, color, color, component, computer, cool, cooler, cooling, cpu, desktop, device, display, e sports, electronic, game, games, gaming, gaming computer, gaming pc, geforce, glow, gpu, graphic, graphics, hacker, hardware, illuminated, intel, led, led light, light, liquid, master, modern, nvidia, object, pc, processor, quadro, race, red, rgb, rgb led, tech, technology, white

ncesc-gaming-faq

How do I fix 100% CPU and 0% GPU usage?

6 Ways to Fix High CPU Usage but Low GPU Usage

  • Solution 1: Disable All Power-Preserving Modes.
  • Solution 2: Close Tasks Running in the Background.
  • Solution 3: Update the Graphics Driver.
  • Solution 4: Enable XMP in BIOS/UEFI.
  • Solution 5: Lower in-game Settings.
  • Solution 6: Reinstall the Fault Game.

How do I fix my GPU 0% usage?

There are a few possible ways to fix this issue:

  • Update Graphics Drivers: Outdated or incompatible graphics drivers can often cause performance problems. …
  • NVIDIA Control Panel Settings: …
  • Windows Graphics Settings: …
  • Power Management Settings: …
  • BIOS Update:

Why is CPU 100 and GPU 0?

It’s likely because the CPU is your computer’s processor, literally, and a discrete GPU is not only optional, but you can run everything graphical on your CPU. Most CPUs have integrated GPUs and so I assume GPU usage fell under CPU usage.

How do I fix my CPU at 100%?

There are a few common fixes for high CPU load, some of which are Windows 10 specific, and others that work on nearly any system:

  • Restart Your Computer. …
  • Manually Closing Background Programs. …
  • Update Drivers And BIOS. …
  • Check for Malware, Viruses, Crypto Miners, and Other Stowaways. …
  • Changing Windows 10 Settings.

Why is my CPU usage at 0 when gaming?

Low CPU usage while gaming can indicate a bottleneck in your system. A bottleneck occurs when one component in your system is not powerful enough to keep up with the others, causing the overall performance to suffer.

HOW TO FIX Low GPU Usage and Low FPS [ 2022 Guide ]

Is 0% CPU good or bad?

0% would mean that CPU is not running but that can’t be while you still see a picture. With a very powerful CPU and very little running in the background, it may be possible to lover usage to less than 1% so it would show as 0% if OS or a program don’t use decimals but it’s actually used 0.99%.

What does 0% CPU mean?

Simply put, 0% utilization means the CPU is running, but its just waiting for other tasks to be assigned, while running default idle tasks.

Is 100% CPU usage bad?

CPUs are designed to run safely at 100% CPU utilization. However, these situations can also impact the performance of high-intensity games and applications. Learning how to fix high CPU usage can resolve some of the most common problems.

How much CPU usage is normal?

Normal CPU usage when you aren’t running any software or loading web pages is around 1% to 5%. The following activities may create the following CPU levels. These are all considered “good” CPU usage so long as you know the activity causing it.

How long can a CPU run at 100 C?

Well, it really depends on the design of the device, and what it’s temp spec rating is. I’ve worked with processors that were temp spec’d up to 100C at my previous employer and supported for the full 100,000hrs of expected operational life at that 100C.

Why does it say 100% CPU?

If the CPU usage is around 100%, this means that your computer is trying to do more work than it has the capacity for. This is usually OK, but it means that programs may slow down a little.

Why does Task Manager say 0 GPU?

Task Manager defaults to showing 3D video usage on gpus. But crunching BOINC on gpus uses none of the 3D video engines on gpus. Hence the 0% usage showing. You switch to viewing CUDA usage is the correct way to use Task Manager for gpu crunching monitoring.

Is 30 percent bottleneck bad?

If your CPU usage is much higher than your GPU usage, that indicates a CPU bottleneck, and vice versa. Anything below 50% utilization is considered low, 50% to 70% is normal, and 70% and up is high.

How do I force GPU usage?

How To Set the Default GPU for Applications and Games

  • From Start Icon, type “Graphics Settings”. Click the results from System Settings.
  • Click Desktop App.
  • Click your application. …
  • Once identified, click Options.
  • Set the application to your preferred GPU.
  • Click save.

How do I enable GPU usage?

Press “Ctrl+Shift+Esc” to open the Task Manager, and then maximize this page. Check whether you can see the GPU usage in Processes (the window may be too small for you to see the GPU). If you don’t see it, please right click “CPU” and tick “GPU”, and you should be able to see the GPU data.

Is 100 GPU usage bad?

No it won’t damage your Graphics card and there is no reason to reduce the utilization unless you are trying to keep youre card cooler or save power. GPUs are designed to run at 100% during gaming and workloads. All it means is that your GPU is going as fast as it can. That’s it.

Is 1% CPU usage good?

If you are currently not running any additional programs, your CPU usage should be anywhere between 1% and 10% just through Windows processes alone. Anything higher than that on an idle PC means that something might be wrong.

Is 100% CPU usage bad for gaming?

Experiencing 100% CPU usage while gaming may not necessarily be harmful, but it can lead to performance issues and affect the overall gaming experience. When a CPU is running at 100% usage, it means that all its processing power is being utilized, leaving no resources for other tasks.

Is 70 CPU usage high?

It is normal for it to be high because the processor is not doing much at the moment. So, if your System Idle process is using 60% – 70% of your CPU, it means you’re actually using 40% – 30% of it.

Is 99 GPU usage bad?

99% load means your GPU is being fully used. That’s fine, because that’s exactly what it’s for. 70 degrees is a very good temperature for a GTX 970 under max load. Mine often runs at 79 degrees C under load (which is fine too).

What CPU temp is too high?

While running more intensive apps or games, the normal CPU temp range can increase to between 70–80°C (158–176°F). The rule of thumb is, a bad CPU temp is 80-85°C (176–185°F) or above. There could be a serious problem if you’re reaching this temperature without gaming or running any resource-intensive programs.

How to increase CPU speed?

To give your CPU more power, find the CPU voltage setting. In your BIOS controls, this may be called CPU VCCIN, CPU Vcore, Dynamic Vcore, or simply CPU Voltage. It’s usually set to 1.25 or Auto by default. Increase this value slowly, for example to 1.4 or 1.5.

Is 67 CPU bad?

Yes 67 is perfectly fine, around 80 is when its a bit hot but still safe and anything above that your cpu will begin slowing itself down in order to prevent damage from over heating.

What is 0.1 CPU?

You can use the suffix m to mean milli. For example 100m CPU, 100 milliCPU, and 0.1 CPU are all the same. Precision finer than 1m is not allowed. CPU is always requested as an absolute quantity, never as a relative quantity; 0.1 is the same amount of CPU on a single-core, dual-core, or 48-core machine.

Is 95 CPU bad?

95C is at least within-spec on modern CPUs and should not damage your CPU. The current gen CPUs tend to aim to boost as high as possible and set their target temperature above 90C. On older systems or lower-powered systems, however, 95C (or often 100C) can indicate insufficient cooling. Was this worth your time?

About The Author

Luke simmons, leave a comment cancel reply.

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Tom's Hardware Forum

  • Forums New posts Search forums
  • What's new New posts Latest activity
  • Members Current visitors

[SOLVED]   Task Manager shows 0.00 Ghz sometimes

  • Thread starter Jayant Arora
  • Start date Feb 6, 2020

Jayant Arora

Distinguished.

  • Feb 6, 2020

Hey Guys!! My Task Manager shows 0.00 Ghz sometimes. It shows just after pc startup, a few minutes after never. Here's the screenshot: image 0GHZ 0.00 GHZ I'm running a 3700X w/ x570 aorus elite What could be the issue ?  

  • Feb 10, 2020

Unfortunately it sounds like a software bug. If you haven't already you can check to see if you have the most up to date driver/firmware for your CPU and motherboard. If that doesn't fix it you could try reinstalling windows. If that doesn't work you might send a note to AMD, your mobo manufacturer and microsoft. That will probably not resolve the issue any time soon but it's probably the extent of what you can do to resolve the issue.

Probably a driver reporting issue. What does HWmonitor report? The driver may not be loading immediately. edit: reading comprehension...  

grimfox said: Probably a driver reporting issue. What does HWmonitor report? The driver may not be loading immediately. edit: reading comprehension... Click to expand...

Unfortunately it sounds like a software bug. If you haven't already you can check to see if you have the most up to date driver/firmware for your CPU and motherboard. If that doesn't fix it you could try reinstalling windows. If that doesn't work you might send a note to AMD, your mobo manufacturer and microsoft. That will probably not resolve the issue any time soon but it's probably the extent of what you can do to resolve the issue.  

Similar threads

King Dranzer

  • King Dranzer
  • Jan 28, 2024
  • ludvigbuskthomasen
  • Oct 14, 2023

Pcnowork

  • Jun 3, 2023
  • Dec 18, 2023

Lutfij

  • Mar 11, 2023

TRENDING THREADS

Admin

  • Started by Admin
  • Yesterday at 10:20 AM
  • Replies: 51
  • Saturday at 10:45 AM
  • Replies: 45

Killer2004!

  • Started by Killer2004!
  • Yesterday at 11:41 PM

tecmo34

  • Started by tecmo34
  • Apr 30, 2011
  • Replies: 5K
  • Wednesday at 12:36 PM
  • Replies: 86
  • Started by masnaf
  • Today at 2:33 AM

aycan

  • Started by aycan
  • Today at 1:03 AM

Latest posts

Moonstick2

  • Latest: Moonstick2
  • 6 minutes ago
  • Latest: caballoBlanco795
  • 17 minutes ago
  • Latest: Turbohelt
  • 23 minutes ago

SkyNetRising

  • Latest: SkyNetRising
  • 24 minutes ago

DrBobke

  • Latest: DrBobke
  • 31 minutes ago
  • Latest: Malcolm50
  • 33 minutes ago

CountMike

  • Latest: CountMike
  • 38 minutes ago

Moderators online

DSzymborski

Share this page

task manager 0 cpu

  • Advertising
  • Cookies Policies
  • Term & Conditions

task manager 0 cpu

task manager 0 cpu

Top Contributors in Windows 10: Ramesh Srinivasan  -  neilpzz  -  Horace Wiggins  -  franco d'esaro  -  _AW_   ✅

February 14, 2024

Top Contributors in Windows 10:

Ramesh Srinivasan  -  neilpzz  -  Horace Wiggins  -  franco d'esaro  -  _AW_   ✅

  • Search the community and support articles
  • Search Community member

Ask a new question

Task manager unexpectadly high CPU usage

For a while now I've noticed that the CPU fan is running louder than normal - every time I bring up task manager to check what is using the CPU I find that  Task Manager is running at anywhere between 15 to 30%.

Within a about a second the Task Manager returns to normal (0.1 to 0.2%) and the CPU fan returns to almost imperceptible noise levels.

If I close the Task Manager and return to other things the CPU fan noise will increase again after a minute or so - every time I open the Task Manager I find that the Task Manager is operating at 15% or greater.

This happens even when just a web browser and and Outlook open.

Is anyone else experiencing this - I'm wondering if it's some sort of glitch in Windows 10 that Microsoft will eventually patch.

Report abuse

Replies (18) .

* Please try a lower page number.

* Please enter only numbers.

Jessen P

Thank you for being part of Microsoft Community.

Perform the steps suggested by TnTzz from the link mentioned below and see if it helps.

http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/windows-modules-installer-worker-high-cpu-usage/bf3dc73e-0b05-4935-920c-22409323f258

Note: This also applies to Windows 10

Do get back to us for any issues pertaining to Windows in the future. We will be happy to help.

2 people found this reply helpful

Was this reply helpful? Yes No

Sorry this didn't help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

Thanks for your feedback.

This appears to be of no use in fixing this problem.

The " Windows module installer" and " Windows update" services are already set to manual , and there is no option to change windows updates to " Check for updates but let me choose whether to download and install them " - is is windows 10 and windows 10 forces all updates on you (no option to change).

As far as I can tell this has nothing to do with "Task Manager" running at over 15% CPU usage in the background, and why it drops back to virtually nothing when you open the task manager to see what is consuming CPU usage.

11 people found this reply helpful

Thank you for the update.

Run the Microsoft Safety Scanner in full scan mode, and remove all the threats that get detected by it and see if the issue persists.

Microsoft Safety Scanner

Note : The Microsoft Safety Scanner expires 10 days after being downloaded. To rerun a scan with the latest anti-malware definitions, download and run the Microsoft Safety Scanner again.

The Microsoft Safety Scanner is not a replacement for using an antivirus software program that provides ongoing protection.

Please take a backup of all the data to an external hard disk before performing a scan as it could result in data loss.

7 people found this reply helpful

13 people found this reply helpful

Thank you for the update.

I would request you to create a new user account and check if it helps.

http://windows.microsoft.com/en-us/windows-10/getstarted-set-up-accounts

4 people found this reply helpful

Thank you for the update.

The issue could also have occurred due to some hardware malfunction, therefore I would request you to take it to some local technician and see if the issue persists.  

1 person found this reply helpful

I have already taken the machine to a local technician who reports that he can't find any hardware issues with my computer.

He reports that the computer runs normally when running all day off a Linux Live CD without having any spikes in CPU usage.

He did a clean reinstall of Windows 10 and noted the symptoms returned after it had completed all Windows Updates

His opinion is that it's some sort of issue with Windows 10 task manager.

24 people found this reply helpful

I would request you to perform SFC scan if the build is not 14279, and then check if the task manager issue stops.

System File Checker is a utility in Windows that allows users to scan for corruptions in Windows system files and restore corrupted files. If a Windows Resource Protection (WRP) file is missing or is corrupted, Windows may not behave as expected.

Perform SFC(System file Checker) scan and see if it helps.

a: Press Windows key + X.

b: Select Command Prompt(Admin).

c: Type SFC / scannow and hit enter.

5 people found this reply helpful

I have run the command as suggested, after scanning the system it reports that some errors were found but not all of them were able to be fixed, and were logged in a CBS.log file in a particular directory.

The problem still exists after rebooting the system.

10 people found this reply helpful

Question Info

  • Performance & system failures
  • Norsk Bokmål
  • Ελληνικά
  • Русский
  • עברית
  • العربية
  • ไทย
  • 한국어
  • 中文(简体)
  • 中文(繁體)
  • 日本語

This browser is no longer supported.

Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical support.

How to fix Task Manager taking up too much CPU

User's image

Admittedly, other processes would create high CPU usage aswell, such as WMIPrvSE, TiWorker and Windows Defender, but I had solved all of those other issues already, and Task Manager still remains the big culprit. How can I fix this???

*P.S: Task Manager would also show high usage, but all other processes wouldn't add up to the amount of CPU usage Task Manager shows me.

Windows 10 A Microsoft operating system that runs on personal computers and tablets. 10,176 questions Sign in to follow

Hello, Suggest you to run System File Checker scan: Search for 'command prompt' using Cortana or Windows Search. From results, right click on Command Prompt and select Run as administrator. Type sfc /scannow command and press Enter key. Let the command complete and then reboot the machine.If that doesn't works, try these steps: Search for 'windows powershell' using Cortana or Windows Search. From results, choose Windows PowerShell and select Run as administrator. Then type/paste following and press Enter key: Repair-WindowsImage -Online -RestoreHealth

Let the command complete, restart your system then.

Let us know if this helps!

Hello  Did the issue crash issue occur with specific application or all the applications?

  • Since the issue occurred after we upgraded to Windows 10, have we checked the device manufacturer website whether present device is compatible with Windows 10.
  • If you have installed any third party antivirus software, we could try to uninstalled third party antivirus software then reboot to check. We may perform a clean boot to check the issue. How to perform a clean boot in Windows - Microsoft Support
  • The taskmgr process is task manager, we could just close the task manager process and not open it if the issue is related to this process. Anyway, I think this may be wrong direction.
  • Usually for application crash issue, there should be 1001 error event recorded in Event Viewer\Windows Logs\Application. We could check this record for any useful information. Foradvacned troubleshooting, the dump is usually. We could run the following command line (run as administrator) to confiure the app crash dump. Reg Add "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps" /f Reg add "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps" /V DumpFolder /t REG_SZ /D "C:\CrashDumps" /f MD C:\CrashDumps Reg add "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps" /V DumpType /t REG_DWORD /D 2 /f Reg add "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps" /V DumpCount /t REG_DWORD /D 10 /f Reboot then check whether there is any related dump saved to C:\CrashDumps folder. We could try to open the dump with debugdiag tool. Here is the download link: Download DebugDiag2.3 from Official Microsoft Download Center Here is the analysis link for reference(step 6): How to use the Debug Diagnostics Tool to troubleshoot high CPU usage by a process in IIS - Microsoft Support
  • If the issue only occurred with the specific applicaiton, we may ask for help from the application support. Best Regards, Wesley Li ============================================ If the Answer is helpful, please click "Accept Answer" and upvote it.

Task Manager can show 0% CPU Usage on Windows 10 and Windows Server 2019

Problem description.

Task Manager “ TaskMgr.exe ” can show 0% (Zero Percent) CPU Utilization on Windows 10 and Windows Server 2019 after an Operating System Upgrade or an Windows Cumulative Update on Windows 10 and Windows Server 2019. In our case we have upgraded an HP Proliant ML310e Gen8 Server from Windows Server 2016 to Windows Server 2019. Everything was working fine after the In-Place Upgrade nearly for 1 year and Task Manager was also showing all Graphs on our Hyper-V Server.

At some time after several Windows Security and Cumulative Updates Task Manager “ TaskMgr.exe ” begun not showing the CPU Utilization Graphs anymore but we don’t know which of these Updates caused Task Manager to malfunction. We know that Task Manager doesn’t show the exact Workload and the exact Utilization can vary in comparison to Windows Performance Monitor “ Perfmon ” but it shows the approximate Utilization and is a very handy Tool for every Administrator.

Unfortunately we had also not the chance to uninstall these Updates because on Windows Server 2019 most of the Updates especially Security Updates cannot be uninstalled. At this point I had to figure out which component was responsible for the Graphs in Task Manager. The Journey began.

Root Cause Analysis

I have basically generated 3 “ TaskMgr.exe ” Process Dumps from a Good and 3 Dumps from Bad Scenario. After the analysis I figured out that “ gdi32full.DLL ” was responsible to collect and deliver the CPU Utilization Info and “ win32u.DLL ” was the Requester.

I will not dig into the Dump Analysis. I couldn’t figure out exactly why it is malfunctioning because Microsoft unfortunately didn’t provide the “ SYMBOLS ” for “ gdi32full.DLL ” therefore I couldn’t dig in deeper.

One thing is definetely clear. A design change in “ gdi32full.DLL ” caused Task Manager to not showing the Graphs anymore. I am not saying that this is a BUG instead it looks like more a Design Change.

I begun testing with the available Information on the Internet and Support Forums and finally got it working. Mentioned below is the solution.

The Utilization Graph in Task Manager worked “ only ” after applying “ all ” the steps with this “ order “. The sequence of the steps is very important.

1. Reinstall the below drivers with this sequence.

a. iLO 4 Channel Interface Driver for Windows Server 2016 and Server 2019 b. iLO 4 Management Controller Driver Package for Windows Server 2016 and Server 2019

2. Change the Power Settings of your HP Proliant Gen8 Server to “ OS Control Mode “.

3. Be sure that the Task Manager Update Speed is set to Normal and NOT Paused. TaskMgr.exe > View > Update Speed > Normal .

As a result everything is working fine again.

Good luck !

  • EDITOR’S PICKS
  • SYSTEM CENTER
  • WINDOWS CLIENT
  • WINDOWS SERVER
  • ACTIVE DIRECTORY
  • MICROSOFT AZURE
  • EU Blue Card
  • AMD Community
  • Upcoming Windows Task Manager Update Will Add NPU ...

Upcoming Windows Task Manager Update Will Add NPU Monitoring For Ryzen 8040 Series Processors

Joel_Hruska

  • Subscribe to RSS Feed
  • Printer Friendly Page
  • Report Inappropriate Content

Introducing the AMD Pervasive AI Developer Contest

  • Adaptive AI (Versal Zynq Kria) 15
  • AI Announcements 12
  • AI Software 13
  • Instinct AI 9
  • Radeon AI 16
  • Ryzen AI 13
  • Tips and Tricks 2

Stack Exchange Network

Stack Exchange network consists of 183 Q&A communities including Stack Overflow , the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Q&A for work

Connect and share knowledge within a single location that is structured and easy to search.

Infamous 0.39 GHz in Windows 10 issue has no fixes?

There is this quite annoying bug, which is probably related to Windows 10, which makes mobile CPUs clock down to 0.39 GHz/399 MHz. Just searching on Google for "0.39 GHz". There are so many results with this exact problem.

My brand new Lenovo ThinkPad T15 has this problem as well with its i7-10510U CPU. However, it gets a bit weirder than that. Even when the CPU is running at 100% on all 4 cores/8 threads, Windows still manages to say "nope, this PC is definitely sleeping". Just take a look (although it's at 499 MHz and not 399 MHz here):

enter image description here

As you can see, all cores are maxed out, yet the CPU is still heavily underclocked. The temperature is fine - it rarely hits 90-95 degrees, where throttling would start to occur.

So I did a couple of things:

  • Turn performance slider in Windows to Maximum Performance
  • Open BIOS and disable CPU Power Management (which has some smart measurements that turns the CPU clock speed and voltage down when it THINKS it's asleep)

That seemed to help and I rarely get stuck at 0.39 GHz again.

HOWEVER, the laptop basically sits in a corner while I work, because I RDP into it from my desktop PC, which has more monitors, better keyboard, and so on. It works great. However, when the screen goes to sleep/turns black, it instantly sets the clock speed to 0.39 GHz again.

So now I have to either choose between having a CPU running at 0.39 GHz OR a CPU running at 4.3 GHz basically all the time, but the screen is turned on at the lock screen, so it might burn in after a while.

I'm tech savvy and I need some answers, so please, fire away. Why is the CPU "sleeping" at extremely low clock speeds, when the CPU hits 100% utilization? Why does Windows 10 or the laptop think it's okay to tell the CPU to "sleep"/preserve power, when the screen is turned off but I am actively using the PC via RDP? Is there a fix to this? So many questions and nobody has the answer, according to the 20+ sites I've went to.

  • power-management

MortenMoulder's user avatar

  • superuser.com/a/1579923/19943 suggests that rebooting while on charge might help, there are other answers there as well –  Mokubai ♦ Jan 15, 2021 at 20:41
  • other potential duplicates: superuser.com/questions/1241844/… and superuser.com/questions/1598516/… –  Mokubai ♦ Jan 15, 2021 at 20:43
  • @Mokubai Didn't work. Already tried. Last link shows a couple of things that I already tried. I do not have minimum/maximum CPU state in my power settings, so that's also not an option. This might be a duplicate, but I'm HOPING someone has an answer, because all other answers did nothing. –  MortenMoulder Jan 15, 2021 at 21:41
  • Is there any behavior change if you log on interactively and the screen is on? BTW: Your screenshot seems to show values from OpenHardwareMonitor. In my opinion this tool is not very reliable as it is next to unmaintained. When it comes to reading CPU values I would recommend to better use a widely used tool like CPU-Z. –  Robert Jan 16, 2021 at 12:56
  • I suggest you run powercfg /h off, and see if it helps. You say the CPU is only underclocked when it is asleep, so disabling hibernation might help. See if this fixes your issue or not. –  Ξένη Γήινος Jan 16, 2021 at 13:05

8 Answers 8

EDIT: Nope, this did not fix my issue. It seems to be somewhat more stable when the screen is on, however, so I'm keeping it up if someone stumbles upon it.

So I think I managed to find a solution to my problem. Windows has introduced a feature called Modern Standby.

To check if Modern Standby is enabled, open CMD and write powercfg /a . If you see a Standby (S0 Low Power Idle) Network Connected option under available states, you have Modern Standby enabled.

To disable this, you can do a few things. If you're running Windows 10 2004 or before (I think), you can add a CsEnabled registry and set it to 0. If you're running 20H2 or newer, it should be PlatformAoAcOverride .

After running one of the above commands and rebooting, it should disable the S0 state:

  • https://borncity.com/win/2020/11/26/windows-10-v2004-cant-deactivate-modern-standby/
  • https://docs.microsoft.com/en-us/windows/iot-core/learn-about-hardware/wakeontouch

Once that is done and S0 is disabled, you should be able to edit your Power Options, so you can set the Processor power management:

Power Options window with following settings: Minimum processor state: 100%, maximum processor state: 100%, system cooling policy: active

Recently had this issue with one of my Lenovo laptops. Lenovo investigated and said it was an issue with the "Modern Standby" feature.

The fix was to update to the latest Lenovo Inteligent Thermal Solution driver (version: 2.0.369.1) and to disabled "Modern Standby" with this Registry Key:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LITSSVC\IC\CONFIG] "MSC"=dword:00000000

Let me know if that works for you :)

Sendi's user avatar

I had very similar issue at my Lenovo T14 gen.1 (windows 10 ver. 1909). I fixed it. Thanks a lot to @MortenMoulder and @Sendi !

I did the following changes:

BIOS upgraded from 1.17 to 1.19 (this fixed low clock freq. after wake-up)

Drivers upgraded (not sure which exactly helped as I applied many upgrades in one go; there were couple upgrades to power and thermal related devices)

Changed registry as follows (this with driver upgrades fixed low clock frequency during screen-off state !!!)

Disabling Modern Standby ("CsEnabled"=0 or "PlatformAoAcOverride"=0) did not help to avoid slow work when the screen is off, but had some other benefits (like all processes stop fully if you put your PC in sleep mode).

Neither helped increasing Minimum Processor state in Power Options, disabling Intel Speed Step and CPU Power management in BIOS (I didn't see any effect from these changes at all).

Changing Windows Power Mode from Better Performance to Best Performance increased CPU clock frequency but did not help against slow work during screen-off state.

Dimitri M's user avatar

Download hardware monitor and check temperatures of your CPU.

I have had the exact same problem.

The fan is not functioning and the CPU is forced to downgrade the frequency because of that.

Why does my CPU utilization differ in Hardware Monitor and Task Manager?

That's actually the problem. Replacing the fan works.

user4951's user avatar

  • 2 That's definitely not true. The CPU temperature was perfectly fine. –  MortenMoulder Apr 7, 2021 at 7:38
  • Your symptom is exactly the same as mine. How do you know the CPU temperature is fine? Did you download hardware monitor? –  user4951 Apr 7, 2021 at 15:55

If it's a Lenovo laptop T15 pc make sure you have BIOS 1.34 or newer since the fix for "(Fix) Sync TX solution to fix BIOS does not issue ATA FreezeLock / BlockSID during resuming from Modern Standby" have been introduced. This should fix the problems for the slow PC 0.39Ghz problem.

ZygD's user avatar

I have the same issue when I RDP, but with a Carbon X1 Gen 9. I did not have the registry key that Sendi mentioned after installing the Thermal Solution driver.

I have found that the CPU fan turns off when the Screen turns off, whether the laptop lid is open or closed. When the screen goes to sleep, you can wake up the system. If I set the screen turn off time to 1 min, the CPU fan will cut off after a minute. Tested with 3 and 5 as well, and the link is 100%

As a current workaround, under Power & Sleep, I have set the "When plugged in, turn off after" to Never.

chch612's user avatar

If it can help, I solved this issue on my Thinkpad X270, which had the same issue, by booting the laptop plugged in. That "disabled" the bug and now, even if I'm not plugged in (at boot or in general), no problem anymore.

eldarium's user avatar

For me.I use AMD cpu.I removeed intel and set amd registry but still not help.

I use internet from my phone(Samsung S21) vie usb tethering connect with a type-c fast charge cable . I found my CPU speed lock to 0.39GHz when I dont use internet and random lock when network running. I guess it because the phone switch sending network data and power. And laptop doesn't how to handle small power from phone then lock cpu powerusage to minimal(watts).

So when I unplug my phone, I see the CPU doesn't lock anymore. Maybe you should check all power source that connect to your laptop.

Sarawoot Pattamapong's user avatar

You must log in to answer this question.

Not the answer you're looking for browse other questions tagged windows-10 laptop cpu power-management ..

  • The Overflow Blog
  • Down the rabbit hole in the Stack Exchange network
  • Featured on Meta
  • Upcoming privacy updates: removal of the Activity data section and Google...
  • Changing how community leadership works on Stack Exchange: a proposal and...

Hot Network Questions

  • Were any U.S. founding fathers present at the storming of the Bastille?
  • Federal income tax as nonresident alien working outside of USA remotely for US employer
  • Will there be another joint International Space Station (ISS) after the current is retired?
  • Egyptian fraction representations of 1 without prime denominators
  • Is it very uncommon to see snakes in the woods, or have I just been unobservant?
  • How would one design a superhuman?
  • The F-16 has a FLCS that constantly holds 1 g. What happens on high pitch angles?
  • Can a decimal that is infinitely repeating in one base be nonrepeating in another?
  • Standardisation and its effect on regression and the the MSE
  • Low attaching vs high attaching mudguards/fenders on MTB
  • Is there any ethical problem with a tiered grading system?
  • Number of ways to form a sequence of 10 letters from four 'a's, four 'b's, four 'c's, and four 'd's if each letter must appear at least twice
  • What's the intuition for reflexive pairs?
  • Paper rejected because 'it did not fit the scope of the journal"
  • Short story in which time slips and the passenger pigeon reappears in North America
  • Car pulls left, rattles very hard, steering wheel not straight when going straight
  • Why does the Falcon 9 first stage perform a burn at 60 km altitude?
  • A weird probability question
  • Can people feel the low heat radiation from very cold surfaces?
  • Differentiating an argument from authority from expert testimony
  • Could relativity be consistent if there are multiple light-like fields with different invariant speeds?
  • How to evaluate the impact of an intervention with no control group?
  • ? - ויהי בימי אחשורוש... - It happened in the days of Ahasuerus... Esther1:1
  • Whether the default behavior of +-×÷ should be saturation instead of wrapping when overflow?

task manager 0 cpu

IMAGES

  1. Show CPU utilization of logical processors in Windows Task Manager

    task manager 0 cpu

  2. task-manager-cpu

    task manager 0 cpu

  3. Windows Task Manager: A Complete Walkthrough

    task manager 0 cpu

  4. cpu in task manager

    task manager 0 cpu

  5. Share IT!: Why Guest OS Task Manager is Showing Different Value Compare to vSphere Performance

    task manager 0 cpu

  6. Windows 10 Task Manager: CPU Speed Rises Above Maximum Speed when overclocking

    task manager 0 cpu

VIDEO

  1. Task manager #pcgamingtips #pcs #pctech #pcbuild

  2. How To Reset CPU Uptime 🤔 #shorts #youtubeshorts #computerknowledge

  3. Desktop Window Manager 100% GPU Usage Fix 😮😱 || High Idle GPU Usage Fix !!!

  4. How to Permanently set High Priority Process in Windows (No 3rd Party Programs) Guide

  5. Redesigned Windows 11 Task Manager! #shorts

  6. Nvidia Control Panel Not Opening in Windows 11 / 10 / 8 / 7

COMMENTS

  1. What does it really mean when CPU usage is 0% in the Windows Task Manager?

    1 Blongs on superuser? - Binary Worrier Jul 28, 2010 at 14:08 1 Migrate to superuser. In the meantime, read codinghorror.com/blog/2007/05/… to see that if it takes 99% of your time, then 99% of your time is empty. - MvanGeest Jul 28, 2010 at 14:08 I am not sure...Please give this question a chance... ;) - smwikipedia

  2. task manager shows zero cpu utilization after windows 10 1709 fall

    Task manager is showing zero cpu utilization after windows 10 1709 fall creators update. Did anyone encounter this and are there any resolutions? Is it possible that this is related to the fact that I haven't activate windows yet? Thanks. This thread is locked. You can vote as helpful, but you cannot reply or subscribe to this thread.

  3. CPU Stuck at 0% and low frequency

    The problem is that the cpu is showing as 0% and with the lowest available frequency both showing the same at Task Manager, HW Monitor, Speccy. I never had this problem with previous Windows 10 Version.

  4. [SOLVED]

    In Task Manager, check the other tabs and remember to expand the listings. Look in the Startup tab to see what is being launched. Could be some corrupted app. Look at Resource Monitor - may also help identify the problem source. View full post.

  5. How to Fix an Incorrect CPU Usage in the Windows Task Manager

    1. Try Some Basic Windows Fixes Before we get started with the complex steps, here are some simple Windows-based tips you can try first. Restart Your PC and Check CPU Usage Again If Task Manager reports incorrect CPU usage, restart your computer first. It seems like an obvious solution, but restarting your computer often fixes the problem.

  6. Windows Task Manager: The Complete Guide

    Press Ctrl+Shift+Esc to open the Task Manager with a keyboard shortcut or right-click the Windows taskbar and select "Task Manager." You can also press Ctrl+Alt+Delete and then click "Task Manager" on the screen that appears or find the Task Manager shortcut in your Start menu. Task Manager's Simple View

  7. CPU usage says 0 in task manager

    #1 So i have this problem where my task manager would show that my cpu's speed and max speed are 0. These are my specs: Spoiler And i run Throttlestop to make the cpu work properly...

  8. AMD's NPUs will finally get support from Windows' Task Manager

    Microsoft will soon support AMD NPUs in Task Manager. NPUs aid AI-based processes, separate from CPUs and GPUs. NPU implementation is important for monitoring and optimizing system performance ...

  9. Zero % CPU Utilization?

    Hi all, I always optimize my system for minimum CPU/RAM usage. My current system always shows 1% CPU Utilization when idle (as reported by Task Manager), but never 0%. I remember in the XP or Win7/8.1 days that 0% was achievable. So my question is, can I

  10. How to Keep the Task Manager's CPU Stats In Your System Tray

    To reopen it, double-click the CPU usage icon in your tray or just launch the Task Manager in one of the usual ways. To close the Task Manager, right-click the tray icon and select "Close"---or just re-open the Task Manager window and click the "X" button to close it instead of minimizing it. Related: Windows Task Manager: The Complete Guide.

  11. CPU (0 % in Task Manager )fans running constantly fast

    When I open Task Manager , CPU usage is about 35-20 % but after 1-2 seconds it drops down to 0% and also at details System Idle Process has CPU usage about 99. I really want some solutions ,please help !!! Thank you very much !! This thread is locked. You can vote as helpful, but you cannot reply or subscribe to this thread.

  12. How to troubleshoot 0% (Zero Percent) CPU Utilization Problem in Task

    Problem Description. Task Manager "TaskMgr.exe" can show 0% (Zero Percent) CPU Utilization on Windows 10 and Windows Server 2019 after an Operating System Upgrade or an Windows Cumulative Update on Windows 10 and Windows Server 2019. In our case we have upgraded an HP Proliant ML310e Gen8 Server from Windows Server 2016 to Windows Server 2019.

  13. [SOLVED] GPU usage 0% in task manager while in-game

    so I alt-tab to open task manager and I see WMI gradually using more and more CPU, usually capping at about 20~30% and staying there. ***When I alt-tab from the game to desktop, "Desktop Window manager" in taskmnger is using 20~40% GPU to draw the game window, as alt-tabbing throws the game into windowed mode. but when I tab-in back to ...

  14. AMD confirms AI NPU monitoring is coming to Windows Task Manager

    AMD confirmed that system monitoring of its XDNA Neural Processing Units (NPUs) is coming shortly to Windows Task Manager through Microsoft's Computer Driver Model.Currently, Windows 11 can only ...

  15. Windows Task Manager Will Soon Include AMD NPU Activity

    In a new blog post written by an obscure author, the company states it's now working with Microsoft to add real-time monitoring for AMD NPUs to the Task Manager for its 8040 mobile CPUs.

  16. 100% CPU Usage in Windows? Here's How to Fix it

    Right-click your "Start menu" and open "Event Viewer.". Expand "Applications and Services Logs," open the "Microsoft" folder, then click "Windows.". Scroll to "WMI-Activity," and click "Operational" in the drop-down. Find and highlight an "Error" in the logs, and take the "ClientProcessId" from the "General ...

  17. Windows Task Manager To get NPU Monitoring with AMD Ryzen 8040 Series

    The next update for the Windows Task Manager will include features to monitor the performance of Neural Processing Units (NPUs) present in AMD's Ryzen 8040 Series mobile processors.

  18. [SOLVED]

    My CPU is showing as running at 0.53 GHz in task manager and in the BIOS and the utilization in task manager never passes 14%, even when running stress tests. at idle I get 35-36...

  19. cpu usage

    1 Left-click the battery icon while charging and see if you can change to "High Performance" or check your power plan and make sure that it is not set to limit CPU while charging. - Mokubai ♦ Oct 30, 2020 at 16:02 Please provide adequate information about your Power Plan settings - Ramhound Oct 30, 2020 at 16:11

  20. Windows 11 Task Manager to monitor Neural Processing Unit load on ...

    W hile the Task Manager in Windows 11 is not one of the most frequently updated system applications, beneficial changes do occur occasionally. Recently, the focus has primarily been on visual updates.

  21. How do I fix 100% CPU and 0% GPU usage?

    If the CPU usage is around 100%, this means that your computer is trying to do more work than it has the capacity for. This is usually OK, but it means that programs may slow down a little. Why does Task Manager say 0 GPU? Task Manager defaults to showing 3D video usage on gpus. But crunching BOINC on gpus uses none of the 3D video engines on gpus.

  22. [SOLVED]

    Solution. #4. Unfortunately it sounds like a software bug. If you haven't already you can check to see if you have the most up to date driver/firmware for your CPU and motherboard. If that doesn't fix it you could try reinstalling windows. If that doesn't work you might send a note to AMD, your mobo manufacturer and microsoft.

  23. Task manager unexpectadly high CPU usage

    Created on March 6, 2016 Task manager unexpectadly high CPU usage For a while now I've noticed that the CPU fan is running louder than normal - every time I bring up task manager to check what is using the CPU I find that Task Manager is running at anywhere between 15 to 30%.

  24. How to fix Task Manager taking up too much CPU

    From results, right click on Command Prompt and select Run as administrator. Type sfc /scannow command and press Enter key. Let the command complete and then reboot the machine.If that doesn't works, try these steps: Search for 'windows powershell' using Cortana or Windows Search. From results, choose Windows PowerShell and select Run as ...

  25. Task Manager can show 0% CPU Usage on Windows 10 and Windows Server

    Solution The Utilization Graph in Task Manager worked " only " after applying " all " the steps with this " order ". The sequence of the steps is very important. 1. Reinstall the below drivers with this sequence. a. iLO 4 Channel Interface Driver for Windows Server 2016 and Server 2019

  26. Upcoming Windows Task Manager Update Will Add NPU ...

    Integrating NPU monitoring into Task Manager also emphasizes the importance of such devices to the future of computing. There are parallels with 2017, when Microsoft added GPU monitoring to Task Manager. That decision was driven by customer requests, and it reflected the increasing importance of the GPU as a core system component.

  27. Infamous 0.39 GHz in Windows 10 issue has no fixes?

    16 There is this quite annoying bug, which is probably related to Windows 10, which makes mobile CPUs clock down to 0.39 GHz/399 MHz. Just searching on Google for "0.39 GHz". There are so many results with this exact problem. My brand new Lenovo ThinkPad T15 has this problem as well with its i7-10510U CPU. However, it gets a bit weirder than that.