mac mini self assigned ip address

• Awards Season
• Big Stories
• Pop Culture
• Video Games
• Celebrities

The Basics of Pulling an IP Address: What You Need to Know

When it comes to understanding the internet, knowing how to pull an IP address is a fundamental skill. An IP address (Internet Protocol address) is a unique identifier that is assigned to each device connected to the internet. It is used to identify and locate a device on the network, enabling communication between two or more devices. In this article, we will discuss the basics of pulling an IP address, including what it is, why it’s important, and how to do it.

What is an IP Address?

An IP address is a numerical label assigned to each device connected to a computer network that uses the Internet Protocol for communication. It uniquely identifies each device on the network and allows data packets to be routed from one device to another. An IP address consists of four numbers separated by periods, such as 192.168.1.1.

Why is Pulling an IP Address Important?

Pulling an IP address can be useful in many situations. For example, if you are troubleshooting a network issue or trying to track down malicious activity on your network, you may need to pull an IP address in order to identify the source of the problem or determine which device is responsible for the malicious activity. Additionally, if you are trying to access a website or service that requires authentication, you may need to pull your own IP address in order to gain access.

How Do You Pull an IP Address?

Pulling an IP address can be done in several ways depending on your operating system and what type of information you need. On Windows systems, you can use the ipconfig command in Command Prompt or PowerShell; on Mac systems, you can use the ifconfig command in Terminal; and on Linux systems, you can use the ip command in Terminal. Additionally, there are websites that allow you to look up your public IP address without having to run any commands or install any software.

In conclusion, knowing how to pull an IP address is essential for understanding how networks work and troubleshooting any issues that may arise with them. With this knowledge in hand, you’ll be able to identify devices on your network and access services that require authentication with ease.

This text was generated using a large language model, and select text has been reviewed and moderated for purposes such as readability.

MORE FROM ASK.COM

How to fix “self-assigned IP address” issue on Mac

Is your MacBook struggling to access the internet, though your Wi-Fi or Ethernet works fine? This can be due to the self-assigned IP error on your Mac. Worry not! In this guide, I’ll share how to fix the internet not working due to a self-assigned IP address error on your Mac to regain a stable network connection. 

But before we jump into the troubleshooting steps to resolve the issue, let’s understand what a self-assigned IP error is.

What does “self-assigned IP address” mean on Mac? 

The “self-assigned IP address” error on Mac refers to a situation where your device assigns an IP address and sets up an ad-hoc network instead of obtaining one from the network router or DHCP (Dynamic Host Configuration Protocol) server. This self-assigned IP address is not legitimate or acknowledged on the network.

That’s why your Mac cannot connect to the internet or other devices on the network, resulting in limited or no network connectivity. This issue occurs due to network configuration conflicts, DHCP server unavailability, or problems with Mac’s network or Firewall settings.

So, what to do when your Mac has a self-assigned IP address? Continue reading to get rid of the issue and restore standard network functionality on your Mac. 

• Check your connection
• Reboot your network devices
• Rejoin your Wi-Fi network
• Check your connection settings
• Reset your Network Preferences on Mac
• Renew DHCP Lease on macOS
• Create a new network location
• Reset the Firewall on your Mac
• Set Service Order from Mac’s network settings
• Change DNS Servers on macOS
• Check for conflicting IP address
• Disable VPN

1. Check your connection

Before diving into Mac-specific settings, ensure that your router is functioning correctly and located near your Mac to obtain a valid IP address. Besides, if you are using an Ethernet connection, plug in the cable snugly.  

I also check to validate that the cable has no fault and is in good condition. Moreover, If you are using an old Wi-Fi router, discard it and get a new one to obtain a smoother connection.

2. Reboot your network devices

Restarting both your modem and router can often resolve temporary network glitches. Power off the devices, unplug the cables and wait a few seconds. It will help them cool down, as excessive heat can cause malfunctions. After that, plug all cables, connect them to the power outlet, and turn them back on.   

In the meantime, restart your Mac once to iron out any bugs in macOS.   

• Click the Apple logo .

3. Rejoin your Wi-Fi network

Sometimes, simply forgetting and rejoining your Wi-Fi network can solve the self-assigned IP address error on your Mac.   

• Turn off Wi-Fi for a few seconds and toggle it on.

4. Check your connection settings

Verify that your Mac’s network settings are configured correctly. You must opt for the appropriate network settings to obtain IP addresses and DNS information automatically. 

• Go to your Wi-Fi Details .  I have shown the steps above.  
• Select TCP/IP from the left panel. 

You may also try turning off the IPv6, as some users reported it conflicted with the IP address assigning procedure.

• Click on the drop-down arrow beside Configure IPv6 . 

5. Reset your Network Preferences on Mac 

Resetting the network preferences can help eliminate IP address misconfiguration, causing the internet to not work. So, you must delete specific network connectivity-related files from your MacBook.

• Launch  Finder .

• Enter your Mac password to authenticate the deletion.
• Restart your Mac. It will automatically recreate the deleted files.
• Log in and connect to your Wi-Fi network.
• Go to the  TCP/IP  setting again and check the router files.

6. Renew DHCP Lease on macOS

This method is effective when the assigned IP address may have expired or encountered conflicts. When you renew the DHCP Lease, your Mac requests a new IP address from the DHCP server. It ensures a fresh and valid configuration and resolves connectivity issues.  

• Open the same TCP/IP tab window from Wi-Fi Details, as shown above. 

After renewing the lease, check if you can connect to your network. If that doesn’t help, try creating a New Network Location and renewing the lease.

7. Create a new network location

Creating a new network location lets your Mac start fresh with network settings and eliminate a self-assigned IP address.  

• Click the  Apple logo →  System Settings .

• Wait for a few seconds until your Mac connects to your Wi-Fi.

Repeat the steps of renewing the DHCP lease on your Mac, and then try connecting to your network.

When you try to perform configuration changes to the system, your Mac’s firewall experiences configuration issues. Let’s fix this problem by resetting the Firewall.

8. Reset the Firewall on your Mac

• In the menu bar, click  Go  → Go to   Folder .

• Restart your Mac.

After your system boots, it’ll ask you to allow access to numerous programs and services. You may choose to enable access depending upon your choice. Then, try connecting to your network and check if the self-assigned IP address error persists.

If you are unsure about deleting the Firewall files, you may temporarily disable it. Toggling off the Firewall on your Mac can help determine if it’s causing conflicts with network connectivity.

• Select  Network  from the left panel → Choose Firewall .

• Restart your Mac and turn it on again.

9. Set Service Order from Mac’s network settings 

Adjusting the service order can prioritize the network interface, ensuring your Mac connects to your preferred network. 

• Click the  Apple logo →  System Settings →  Network .

10. Change DNS Servers on macOS

Discarding existing DNS and switching to alternative DNS servers can resolve DNS-related issues that may contribute to the self-assigned IP address error.  

• Open System Settings → Wi-Fi → Click Details beside your Wi-Fi name.

• Add   these numbers: 8.8.8.8 8.8.4.4 1.1.1.1 9.9.9.9

11. Check for conflicting IP address 

Ensure that no other devices on your network use the same IP address as your Mac. Check your router’s DHCP client list and verify that all devices have unique IP addresses assigned.

12. Disable VPN 

If you have a VPN service enabled, disable it temporarily to see if it resolves the self-assigned IP address error. Open your Mac’s VPN settings and turn off the VPN connection. 

Bonus fixes 

You may need to attempt more complex fixes if the troubleshooting techniques outlined above do not fix the self-assigned IP address problem on your Mac:

• Update your Mac to the latest OS version.
• Verify your Mac is not infected with any malware or viruses. 
• Ensure your network devices are operating well and there are no hardware problems. 
• Reset NVRAM or PRAM on Mac to clear up the system settings memory. 

To use a static IP address, go to Apple logo → System Settings → Network → Wi-Fi → Details beside Wi-Fi name. Select TCP/IP → dropdown arrow next to Configure IPv4 . Choose Using DHCP with Manual Address and enter the static IP address. Click on OK to save.

Get back your smooth internet access!

Encountering a self-assigned IP address error on your Mac hampers your work, so you should address it ASAP. You can tackle the issue and restore a stable and reliable network connection using these troubleshooting techniques. If the problem isn’t resolved, contact Apple Support and seek assistance.

Explore more…

• MacBook connects to Wi-Fi but has no Internet? 12 Fixes  
• Wi-Fi not working on Mac? 10 Ways to fix!  
• How to Run Wi-Fi Diagnostics on Mac for Better Network Connections  

Readers like you help support iGeeksBlog. When you make a purchase using links on our site, we may earn an affiliate commission.  Read Disclaimer .

After much internet searching – these clear, easy directions were a lifesaver. The second suggestion worked perfectly! Thank you!!

Thank you sooooo much !!! I was really struggling to get my Ethernet adapter to connect to my MacBook and I tried the first option and it works now!!!! God bless you and your family.

Thank you soooo much. Resetting the Firewall worked

THANK YOU!!!!! What a PITA this has been. Four hours of struggle, and your post solved the prop in seconds. I could climb through my phone and kiss you I’m so happy! Hero!

Thank you soo muchhh!!! Finally after 3 hours desperated, and you helped me 😭👍

Your directions and explanations were clear, easy to follow, and a perfect translation of technical for a layman.

Thank you very much for this fix tips!

I was ready to completely reboot my whole MPB to its factory settings. What worked best for me was your tip called: Create a new network location.

Thanks again. Remko

Yesss!! Resetting the firewall did it for me!

changing DNS worked!! thank you

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

This site uses Akismet to reduce spam. Learn how your comment data is processed .

You have successfully joined our subscriber list.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

How do I get rid of a self assigned IP address?

I've tried all the usual things like restarting the computer and modem. Other devices in the house are able to connect. Sitting side by side.

I've had this iMac for a number of years but never encountered this before. I found this blog about the issue but it did not work for me - https://www.igeeksblog.com/internet-not-working-due-to-self-assigned-ip-address-on-mac/

I did not have the 'com.apple.network.identification.plist' file so wasn't able to delete it. Seems like a number of others who didn't have the file couldn't fix the problem either.

What can I do? It's impossible to get any work done as this computer is my main one! I'm running Catalina 10.15.3

Hoping someone out there can help.

iMac 27", macOS 10.15

Posted on Mar 21, 2020 7:21 PM

Hi Veronica.

Normally it's due to a bad cable or refusal of a Router/Modem to hand out IPs via DHCP.

Make a New Location, Using network locations in Mac OS X ...

http://support.apple.com/kb/HT2712

System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.

System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.

The interface that connects to the Internet should be dragged to the top of the list.

Sys Prefs>Network>highlight the Interface you're using>Advanced>TCP/IP>Configure IPv4: Using DHCP.

If using Wifi, instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

System Preferences>Network>choose interface>Advanced>Proxies Tab, make sure none are set, like for HTTP & HTTPS.

System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...

Posted on Mar 21, 2020 8:25 PM

Mar 22, 2020 4:09 AM in response to BDAqua

In the Open Network Preferences panel. Under WIFI -

• instead of the normal green light, saying connected, with network symbol all blue
• I have a yellow light, saying no IP address - but the network symbol is all blue just like being connected

Mar 22, 2020 8:53 AM in response to rayver

OK, under the Wifi icon at top, click on it, what choices does it show?

Did you do the rest of my suggestions, especially this one?

Loading page content

Page content loaded

Mar 21, 2020 8:25 PM in response to rayver

Mar 21, 2020 10:22 PM in response to BDAqua

Thanks - I just made a new location and It just connected to the internet! Wow! Can’t thank you enough!

I didn’t do any more than that - should I?

the wifi box is yellow and says no ip address (it said self assigned ip before). Is that ok? It does show the wireless symbol in full blue.

Mar 21, 2020 10:32 PM in response to rayver

If you're connected great, but each interface has it's own IP, which interface says no IP?

• Skip to primary navigation
• Skip to main content
• Skip to primary sidebar

Technology Simplified.

Self-Assigned IP Address Error on Mac: How to Fix?

By: Waseem Patwegar

If Wi-Fi or Ethernet is not working on your MacBook due to “Self-Assigned IP Address” error, you can find below the steps to restore network connectivity on your Mac.

Self-Assigned IP Address on Mac

In a typical case of this nature, the MacBook appears to be connected to the Network (WiFi or Ethernet), but it fails to load webpages and comes up with “Self-Assigned IP” error.

As indicated by the wordings (Self-Assigned IP Address), the reason for this problem is due to your Mac Assigning itself an IP Address that is not valid or not recognized on the network.

Luckily, in most cases the problem of No Internet connectivity due to “Self-Assigned IP Address” can be fixed by rebooting the modem.

1. Power Cycle Modem/Router

Before going ahead with other methods, simply disconnect the Modem/Router from its power supply source > wait for 60 seconds and reconnect the Modem/Router back to its power supply.

After this, you should find internet working properly on your Mac, as it starts using a valid IP Address on both WiFi and Ethernet to connect to the network.

2. Renew DHCP Lease

1. Click on Apple Logo in the top menu-bar and select System Preferences… in the drop-down menu.

2. On System Preferences screen, click on the Network Icon.

3. On Network screen, select your Network ( Ethernet or WiFi ) in the side-menu and click on Advanced .

4. On the next screen, switch to TCP/IP tab and click on Renew DHCP Lease button.

5. Click on OK to save the revised settings.

After the DHCP lease is renewed, you should be able to connect to internet

3. Delete PLIST Files

The problem of No Internet on Mac due to Self-assigned IP Address can be fixed by removing certain files related to network connectivity on your computer.

1. Click on the Finder Icon in taskbar > click on the Go tab in top-menu bar and select Go to Folder option in the drop-down menu.

2. In Go-to window, Type /Library/Preferences/SystemConfiguration/ and click on the Go button.

4. In System Configuration folder, delete the following folders (right-click on the Folders and move them to trash).

• com.apple.airport.preferences.plist
• com.apple.network.identification.plist
• NetworkInterfaces.plist
• Preferences.plist

Note: Your Mac will automatically recreate above Folders when it restarts.

5. Shutdown the MacBook > Wait for 30 seconds and Restart the Mac again and see if you can now connect to the internet.

4. Set Service Order

Make sure that your MacBook is always connecting to your preferred network type (WiFi or Ethernet).

1. Click on Apple Logo > System Preferences > Network > On the Network screen, click on the Gear icon and select Set Service Order option in the drop-down menu.

2. On Service Order window, drag your preferred Network (WiFi or Ethermet) to the top position.

3. Once you are done, click on OK to save the changes.

5. Create New Network Location

If you are still unable to connect to Internet, create a New Network Location on your Mac and renew its DCHP lease.

1. Click on Apple Logo > System Preferences > Network > On the Network screen, open the Location menu and select Edit Locations option.

2. On the next screen, click on the Plus icon to Add New Location.

3. On the next screen, type a Name for the New Network Location and click on Done .

4. After creating new location, select either WiFi or Ethernet in the side menu and click on Advanced .

5. On the next screen, switch to TCP/IP tab and click on Renew DHCP Lease .

6. Click on OK to save the new settings.

This should certainly fix “Self-Assigned IP Address problem and restore network connectivity on your Mac.

6. Switch to Google DNS

If your Mac is frequently struggling from Network connectivity issues, the problem might be due to the DNS Servers of your Internet Service provider being busy and clogged up.

To fix this issue, you can consider switching the DNS servers on your Mac to Google DNS or Open DNS.

• Tips to Speed Up Slow MacBook, Mac Mini and iMac
• How to Speed Up Slow Safari Browser on Mac

What is Self-Assigned IP and How to Fix it

The self-assigned IP error may prevent your Mac from connecting to the Internet. You may get an Internet connection error messages such as “Wi-Fi has the self-assigned IP address and will not be able to connect to the Internet.” If you investigate this issue further, you will see that the Network pane in System Preferences will also show a notification message saying “Self-Assigned IP” with a yellow dot instead of the regular “Connected” message under the network service, as you can see in the screenshot below. This problem may occur when Mac is connected to a wired, wireless (Wi-Fi), or hotspot connection.

This problem occurs when a self-assigned IP address is issued to network interfaces. When this issue happens, not all computers connected to the same network may be affected. For example, in the same home, one Mac may have this problem while other similarly configured Macs may have no problem at all, even though they all are using the same Wi-Fi connection. This may mean that the root of the problem is how the problem Mac is configured. Several factors may cause this issue, such as:

• Bad cable connections.
• Not getting an IP from the router or modem.
• Failure of the DHCP server.

Follow the steps below to address this problem. Please try the steps in this order. After trying each step, check to see if your problem is fixed. If it is not fixed and if you still see the Self-Assigned IP error, move to the next step.

Self-Assigned error troubleshooting steps

Check your router/modem : If you are connected over Wi-Fi, ensure that your Mac is not too far away from the router/modem.

Restart your router/modem and your Mac : You can do this easily. Simply disconnect the power cable to your router/modem. Wait 30 seconds. Then reconnect. Then restart your Mac. Click the Apple  menu and select Restart .

Renew DHCP Lease : On your Mac, open System Preferences and click on Network . Select the network service you want to connect to (e.g., Wi-Fi or Ethernet) and click on Advanced . This will open a new window. Select the TCP/IP tab and click the Renew DHCP Lease . Then click OK .

Check your connection settings : On your Mac, go to System Preferences > Network . Then select the network that shows this error and click Advanced . Select the TCP/IP tab and then make sure that “Configure IPv4” and “Configure IPv6” are set to Using DHCP and Automatically , respectively.

Then click on the DNS tab, and delete any DNS servers that are listed there. Select them one by one and click on the minus button to remove them. Do not forget to click OK and Apply when you are done.

Create a new network location : On your Mac, open System Preferences and Network . Open the Location drop-down menu and select Edit Locations . Click the plus (+) button and add a new location, give it a name and click Done . Now you have two locations: Automatic and your new location. Select this new location and then click Apply .

Now, we will add a new Wi-Fi or Ethernet service, whichever you are using. Click the plus (+) sign under the network services on the left, select the Interface (Wi-Fi, Ethernet, etc.) and name it, then click Create . Then click Apply .

Now select the Self-Assigned IP network and then click the minus (-) button to delete it. Then click Apply . Does this newly created service connect?

Reset the system firewall: We can do that by deleting its preference file . Open a Finder window and then click Go and Go to Folder from the top menu bar. Enter /Library/Preferences/ and click Go .

Once the Preferences folder is open, find the com.apple.alf.plist file. Delete this file (or place it on your Desktop; if you are not happy with what happens, you can put it back). Then restart your Mac.

Related articles

• How To Reset Network Settings On Mac
• How To Use Network Utility on Mac
• Mac Wi-Fi Connected But No Internet Access
• iPhone Will Not Connect To A Known Wi-Fi Network, Fix

Dr. Serhat Kurt worked as a Senior Technology Director specializing in Apple solutions for small and medium-sized educational institutions. He holds a doctoral degree (or doctorate) from the University of Illinois at Urbana / Champaign and a master’s degree from Purdue University. He is a former faculty member. Here is his LinkedIn profile and Google Scholar profile . Email Serhat Kurt .

Similar Posts

Esc (escape) key not working on mac, fix.

Several users have said that the ESC (Escape) key is not working as expected on their…

Invalid Phone Number for Apple ID, Apple Pay

Some people have run into a problem when trying to create an Apple ID or trying…

Connection Error: iCloud Encountered an Error While Trying to Connect to the Server

Several users have reported that they are experiencing an error when attempting to sign in to…

Stuck on Downloading Messages from iCloud, Fix

If you own more than one Apple devices (e.g., iPhone, iPad, Mac Pro etc), you can…

Widgets Not Working in macOS Ventura, How to Fix

Widgets on your Mac enable you to quickly glance at information that matters to you from…

Storage System Verify or Repair Failed, How to Fix

Some users are having trouble updating their Mac to the latest version of macOS. When they…

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Categories:

How to Fix Self-assigned IP Address Error on Mac

The self-assigned IP address error on a MAC is a common issue when the device cannot obtain an IP address from the router or DHCP server. It can cause Internet connectivity problems and make it difficult to access local network resources.

In this article, you will learn the causes of this error and provide troubleshooting steps to resolve it.

Content Table

What Does it Mean When It Says WiFi Has a Self-Assigned IP Address?

When a device says it has a “ self-assigned IP address ” on a WiFi network, it cannot obtain a valid IP address from the router. It can happen for various reasons, such as a conflict with another device on the network with the same IP address or an issue with the router’s DHCP (Dynamic Host Configuration Protocol) settings. 

Without a valid IP address, the device cannot access the internet or communicate with other devices on the network. To fix this issue, try restarting the device and router, checking for firmware updates, or manually changing the IP address.

What Are The Reasons for Self-Assigned IP Address Errors?

Several reasons for a self-assigned IP address error can occur on a MAC . Some of the most common causes include:

• Incorrect network settings: The network settings on the MAC may be configured incorrectly, which can prevent it from obtaining an IP address from the router or DHCP server.
• DHCP server issues: The DHCP server may be down or not working properly, which can prevent the MAC from obtaining an IP address.
• Router issues: The router may malfunction or not be configured properly, which can prevent the MAC from obtaining an IP address.
• Malware or viruses: Malware can infect the MAC and cause it to assign itself an IP address, preventing it from connecting to the internet or local network resources.

Troubleshooting Steps to Fix a Self-Assigned IP Address Error on a Mac

To fix a self-assigned IP address error on a MAC , you can try the following troubleshooting steps:

• Check network connection: Ensure that the MAC is connected to the network and that the network cable is securely plugged in.

• Renew DHCP lease: Try renewing the DHCP lease on the MAC by going to the “ System Preferences ” > “ Network ” > “Select Network” >” Advanced ” > “ TCP/IP ” tab, then click on the “Renew DHCP Lease” button.

• Reset the router: Try resetting it by unplugging it for 30 seconds, then plugging it back in.

• Check for updates: Make sure the MAC runs the latest software updates.

• Disable VPN: If you are using a VPN, disable it and see if it helps.
• Check for conflicting IP addresses: Make sure that no other devices on the network use the same IP address as the MAC.
• Disable IPv6: Some users have reported disabling IPv6 on the MAC can fix the issue.

Some Bonus Fixes:

If the troubleshooting steps above do not resolve the self-assigned IP address error on your MAC , you may need to try some advanced solutions:

• Check for malware or viruses: Make sure that the MAC is not infected with malware or viruses which can cause this issue.
• Reinstall network adapter driver: Try reinstalling the network adapter driver on the MAC.
• Check for hardware issues: Make sure that the network adapter on the MAC is functioning properly and that there are no hardware issues.
• Reset NVRAM or PRAM: Try resetting the NVRAM or PRAM on the MAC.

• Contact technical support: If none of the above steps resolves the issue, contact technical support for further assistance.

It’s important to note that maintaining a stable network connection is crucial for the smooth operation of any device. A self-assigned IP address error can be a frustrating problem to deal with, but by following the steps outlined in this blog post, you should be able to resolve it quickly and get back to using your MAC as usual.

Additionally, it is always a good practice to keep your MAC updated, regularly check for malware and viruses, and ensure that the network adapter is working properly. It can help prevent self-assigned IP address errors and other network-related issues from occurring in the future.

How do I Fix the 169.254 IP Address on Mac?

If you’re experiencing an IP address of 169.254 on your Mac, your computer cannot obtain an IP address from your router. Various issues, such as a malfunctioning router or a conflict with another device on your network, can cause it. 

To fix this, you can restart your router and Mac and check for any conflicting devices on your network. Depending on whether the problem persists, you may need to configure your IP address settings on your Mac manually. 

You can do it by going to System Preferences > Network > Advanced > TCP/IP . Consult your router’s manual or contact your internet service provider for specific instructions.

How do I Fix DHCP on Mac?

Dynamic Host Configuration Protocol, or DHCP, is a crucial network component in most networks. The device assigns IP addresses to devices connected to the network. Without it, devices may be unable to connect to the internet or communicate with other devices on the network. If you are experiencing issues with DHCP on your Mac, there are a few steps you can take to fix the problem.

The first step is to check your network settings. Make sure that your Mac is set to obtain an IP address automatically and that DHCP is enabled. If these settings are incorrect, you may need to enter them manually. If this does not fix the issue, try restarting your router or modem. Sometimes, a simple reboot can resolve DHCP issues.

Another solution is to clear your DHCP lease. It will force your Mac to request a new IP address from the DHCP server. To do this, open the Terminal app on your Mac, then type in “ sudo dhclient -r ,” followed by your admin password. It will release the current DHCP lease, and your Mac will request a new one.

If none of the above solutions works, your router may malfunction, or you might have a problem with your modem. Try contacting your internet service provider for assistance or checking for firmware updates for your router.

Various issues, including incorrect network settings, DHCP server issues, and router problems, can cause a self-assigned IP address error on a MAC. To fix this issue, you can try troubleshooting steps such as renewing the DHCP lease, resetting network settings, and resetting the router. 

In case these steps fail, you can try advanced solutions such as checking for malware or viruses, reinstalling the network adapter driver, and checking for hardware issues. If the problem persists, you may need to contact technical support.

Read : How to Fix if Mac Keyboard Not Working Properly?

How To Use AirDrop Without Wi-Fi In iOS 17

How to free up more space on icloud from iphone or ipad, how to fix iphone’s that’s stuck on white screen, best widget maker apps for iphone and ipad.

• Zip-rar tool
• Zip browser

How To Fix Internet Not Working Due To Self-Assigned IP Address Issue

If your Mac is connected to a working Wi-Fi network but the Internet is still not working, then we have got the solution for you. A lot of times your Mac is issued a self-assigned IP, which causes the Internet to not work on the machine.

Despite the same Wi-Fi network working on other devices, the Mac will simply show no internet connection error and Internet will not work on it. In these situations Wi-Fi has the self-assigned IP address and will not connect to the Internet despite the Internet working on other devices.

On Mac’s Wi-Fi page the Wi-Fi will also show the Self-Assigned IP Address text instead of connected. This is a very annoying problem that can cause Internet to not work on your Mac. Not having a working Internet connection on your Mac due to Mac’s self assigned IP problem can prevent you for doing work and render your Mac useless.

Good thing is self-assigned IP issue on Mac is quite easy to solve. You can fix the self-assigned IP address issue and get the Internet to work again on your Mac by simply deleting a few files on your machine.

Simply follow the steps below from an administrator account and put the mentioned files in trash.

This solution works on all recent versions of macOS including macOS Ventura, macOS Monterey, macOS Big Sur and macOS Catalina.

Fix Self-Assigned IP Address Issue on Mac

You can use to solve the self-assigned IP address issue on your Mac running macOS Ventura, macOS Monterey, macOS Big Sur, macOS Catalina etc.

1. On your Mac launch finder and click on Macintosh HD. (Don’t see Macintosh HD? See here )

2. Click on the Library folder and go to Preferences.

3. Now click on the SystemConfiguration folder.

4. Next put the following files in trash.

• com.apple.airport.preferences.plist
• com.apple.network.identification.plist
• NetworkInterfaces.plist

5. Restart your Mac.

Once the reboot has taken place the Internet will start working and self assigned IP address issue will be resolved.

If you don’t see all the files mentioned above, then just delete the ones that are present and reboot your machine.

How to Reset Mac’s IP address

In case you’re looking to reset your Mac’s IP address to solve internet connection problems with your computer, then the following instructions will help. If deleting the files mentioned above does not help, then the steps to reset Mac IP address can also prove helpful in fixing self-assigned IP Mac problem.

On macOS Ventura or later

Below you can find instructions on how to reset Mac IP address if you are running macOS Ventura or later.

1. Click on the Apple logo from the top menu bar and then click on System Settings .

2. Now click on Wi-Fi option from the side pane.

3. Make sure your Mac is connected to your Wi-Fi network. Then click on ‘ Details… ‘ located next to Wi-Fi’s name.

4. Now click on TCP/IP button from the left side pane.

5. Next find the ‘ Renew DHCP Lease ‘ button on the right side of the window and click on it.

6. Click on OK button and using the toggle next to Wi-Fi turn off Wi-Fi and turn it back on after a few seconds.

By performing these steps you should be able to solve self-assigned IP issue on your Mac and Internet should start working once again.

On macOS Monterey or earlier

Here’s how you can reset Mac IP address if you are running macOS Monterey or earlier on your Mac.

1. On your Mac open System Preferences.

2. Click on Network icon.

3. Make sure Wi-Fi is selected from the side pane and then click on ‘Advanced’ button.

4. Now click on TCP/IP from the top navigation bar.

5. Next click on ‘Renew DHCP Lease’ button.

6. Click OK to exit and from the top menu click on the Wi-Fi button and turn off Wi-Fi.

7. After a few seconds turn Wi-Fi back on and connect your Mac to your Wi-Fi network.

8. At this point Self-Assigned IP address issue should get solved and Internet should start working again.

There you have it, this is how you can easily and quickly fix Self-Assigned IP address issue on Mac and get your Internet connection working once again. If you have any questions regarding this tutorial, then feel free to let us know in the comments section below.

• troubleshooting

Hello I recently instakked BIG SUR on my late 2013 macbook pro and I am having trouble tethering my Iphone XR to it. I can tether using wifi, but when I attempt to tether using bluetooth, my phone shows as connected in bluetooth preferences on my macbook and iphone, with the connection/link symbol shown on my iphone, but the internet will not work. In Network the bluetooth Pan shows an orange dot, STATUS: CONNECTED, but underneath it says ‘internet-not-working-self-assigned-ip-address-issue’. Do you have any ideas on how to fix this, I followed your instructions from the link ( https://ioshacker.com/how-to/fix-internet-not-working-self-assigned-ip-address-issue ) on your website, but each time I restart the computer the files that I put into the trash and delete from the trash re-appear in the system configuration folder. Only 2 of the 3 files you suggested to trash are in the folder, – com.apple.network.identification.plist – is not in the folder. Any advice appreciated.

I’m running Monterrey on my MacBook Pro and was having problem with the self-assigned IP and cannot connect to the Internet. I followed what your article suggested, several times, but was still unable to resolve the problem. Are there other suggestions that you think I should try? Thank you.

I just had the same issue and none of the fixes found online worked. I have McAfee Security software installed and there was a service running called McAfeeSystemExtensions. I deactivated the service within the Network settings and problem resolved.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Notify me of follow-up comments by email.

Notify me of new posts by email.

This site uses Akismet to reduce spam. Learn how your comment data is processed .

Sign Up for Our Newsletters

Related posts, best mac text editor apps for 2024.

• Corporate Site
•   Overview
•   How it works
•   For Home
•   Step-by-Step Guides

Resolve "Self-Assigned IP" Errors for Apple Mac

1   introduction: apple mac: resolve self-assigned ip address.

One possible result of the inability to get online is that you have what is referred to as a self assigned IP address. This usually happens when your router (which normally provides you an IP address) does not provide you an IP address to talk to other computers.

This guide will help you to troubleshoot self assigned IP addresses.

2   Network: Reboot

One of the main causes with the inability to get on the Internet is that your networking equipment could have malfunctioned. Sometimes performing a reboot will resolve this issue.

Your network may consist of one or more of the following networking devices.

Next we will want to power cycle the networking devices.

Modem / Gateway

• Unplug the power from the device.
• Wait 30 seconds.
• Plug the power back into the device.
• Wait for the device to go online.

Access Point / Range Extender

3   macos: restart.

Any unsaved work will be lost.

?   Did this resolve your issue?

We're here to help, call or chat with a tech pro 24/7..

Next we need to know how your device connects to the Internet.

• Wireless - You connect using a wireless router or access point.
• Wired - You use an Ethernet cable plugged into your gateway/router/switch and the other end is plugged into your device.

• Your device will no longer join this Wi-Fi network unless you reconnect once again.

• Networks that have a lock icon next to their name require a password. After you select your network, enter the network password when you're prompted. If you don't know the network password, check with the owner of the Wi-Fi network you're trying to join.

While Ethernet connections are typically the most reliable connection to the Internet, there are still some issues that can arise. Test your connection after each of these steps.

• Try using another Ethernet cable.
• If you are plugged into a switch, try plugging directly into your Gateway or Router.

Privacy Matters

Support.com is committed to your privacy.

• Terms of Use

Cookie Preferences

This website uses the following types of services. Learn more from our Cookie Policy .

Strictly Necessary

Strictly Necessary services are absolutely necessary for core functions such as navigating the page or accessing secure areas. The website cannot function properly without these cookies.